{"product_id":"festool-hw-190x2-6-ff-pw16-wood-rip-cut-190mm-16-tooth-saw-blade","title":"Festool HW 190x2,6 FF PW16 WOOD RIP CUT 190mm 16-Tooth Saw Blade","description":"\u003c!-- Description --\u003e\r\n\u003ch3\u003eFestool HW 190x2,6 FF PW16 WOOD RIP CUT Saw Blade\u003c\/h3\u003e\r\n\r\n\u003cp class=\"feature_box\"\u003e\u003cstrong\u003eAt a Glance: \u003c\/strong\u003eHigh-performance 190 mm carbide saw blade with 16 widely spaced rip-cut teeth, 2.6 mm cutting width and Festool FastFix star-shaped mounting, developed specifically for fast longitudinal cuts with the grain in solid hardwood and softwood using the Festool PRECISIO CS 50.\u003c\/p\u003e\r\n\r\n\u003cp itemprop=\"description\"\u003eThe Festool HW 190x2,6 FF PW16 WOOD RIP CUT is the specialist blade for fast and efficient rip cutting on the Festool PRECISIO CS 50 table saw. Its low 16-tooth count and large spacing between the teeth provide excellent chip clearance when cutting along the grain, allowing the blade to move quickly through solid timber with comparatively little feed force. The aggressive 28° positive chip angle further supports rapid cutting progress, while the robust carbide teeth provide long service life and can be professionally resharpened when required. Unlike conventional circular saw blades with a round centre bore, this CS 50 blade uses Festool's distinctive \u003cstrong\u003eFF FastFix star-shaped interface\u003c\/strong\u003e, allowing rapid tool-free blade changes on the compatible machine. It is an excellent choice for ripping boards, dimensioning solid timber and other woodworking tasks where speed and efficient chip removal are more important than the ultra-fine finish produced by a high-tooth-count cross-cutting blade.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"definition-products\"\u003e\r\n  \u003cstrong\u003eWOOD RIP CUT – made to work with the grain\u003c\/strong\u003e\r\n  \u003cp\u003eRip cutting means sawing predominantly in the same direction as the wood fibres. These cuts generate long chips and require plenty of space between the teeth for efficient material removal. The WOOD RIP CUT PW16 uses only 16 widely spaced teeth and a strong positive cutting angle, allowing chips to clear quickly and helping the CS 50 cut solid timber rapidly without unnecessary feed resistance.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"product-highlights\"\u003e\r\n  \u003ch3\u003eProduct highlights\u003c\/h3\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003ePurpose-built for the CS 50:\u003c\/strong\u003e Specifically designed for the Festool PRECISIO CS 50 table saw.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eOptimised for rip cuts:\u003c\/strong\u003e Developed especially for longitudinal cutting along the grain in solid wood.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e190 mm blade diameter:\u003c\/strong\u003e Correct blade format for the compatible CS 50 system.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e16 widely spaced teeth:\u003c\/strong\u003e Large tooth gaps provide excellent chip removal and rapid cutting progress.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e28° positive chip angle:\u003c\/strong\u003e Aggressive cutting geometry helps pull efficiently through solid timber with reduced effort.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003ePW tooth geometry:\u003c\/strong\u003e Application-specific tooth form optimised for high-performance longitudinal sawing.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e2.6 mm cutting width:\u003c\/strong\u003e Robust professional kerf matched to the CS 50 system.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e1.8 mm blade body:\u003c\/strong\u003e Stable steel blade body supports accurate running under demanding rip-cutting loads.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eCarbide cutting teeth:\u003c\/strong\u003e Hard-wearing cutting material provides excellent durability and professional performance.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eExcellent resharpening properties:\u003c\/strong\u003e The carbide teeth can be professionally sharpened to extend useful blade life.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eFastFix star mounting:\u003c\/strong\u003e Allows quick blade changes without the conventional round-bore mounting system.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eTool-free blade change:\u003c\/strong\u003e Designed around the CS 50 FastFix system for quick, efficient changes between specialised blades.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eYellow Festool colour coding:\u003c\/strong\u003e Yellow identifies Festool saw blades intended for machining wood.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eSuitable for hardwood and softwood:\u003c\/strong\u003e Excellent choice for fast solid-timber ripping across a broad range of species.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"product-compatibility\"\u003e\r\n  \u003ch3\u003eProduct Compatibility\u003c\/h3\u003e\r\n  \u003cul class=\"sideline-bullet\"\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eFestool PRECISIO CS 50\u003c\/strong\u003e table saw.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\r\n  \u003cp class=\"info-products\"\u003e\u003cstrong\u003eImportant compatibility note:\u003c\/strong\u003e This blade uses Festool's dedicated \u003cstrong\u003eFF FastFix star-shaped mounting interface\u003c\/strong\u003e. It does not have a conventional 20 mm or 30 mm round centre bore and should only be fitted to machines specifically designed for this Festool FF blade connection.\u003c\/p\u003e\r\n\u003c\/div\u003e\u003csection\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003c!-- Features and Benefits --\u003e\r\n\u003cdiv class=\"product-features\"\u003e\r\n  \u003ch4\u003eFeatures\u003c\/h4\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eWOOD RIP CUT design:\u003c\/strong\u003e Specialised for rapid longitudinal sawing in solid timber.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e190 mm outside diameter:\u003c\/strong\u003e Matched specifically to the Festool CS 50.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e16-tooth configuration:\u003c\/strong\u003e Low tooth count provides generous gullets for effective chip removal.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003ePW tooth form:\u003c\/strong\u003e Rip-cut geometry designed for high cutting performance with the grain.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e28° chip angle:\u003c\/strong\u003e Strong positive angle promotes rapid, low-effort feeding through solid wood.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e2.60 mm cutting width:\u003c\/strong\u003e Robust kerf suitable for demanding solid-wood cutting.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e1.80 mm blade thickness:\u003c\/strong\u003e Stable blade body supports controlled, accurate running.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eCarbide cutting edges:\u003c\/strong\u003e Durable tooth material for long professional service life.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eFastFix interface:\u003c\/strong\u003e Festool-specific star-shaped mounting for rapid blade changes.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eWood colour coding:\u003c\/strong\u003e Yellow marking simplifies blade identification within the Festool system.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\r\n  \u003ch4\u003eBenefits\u003c\/h4\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eFast ripping: \u003c\/strong\u003eThe wide spacing between only 16 teeth allows large volumes of timber chips to clear efficiently.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eReduced feed effort: \u003c\/strong\u003eThe 28° positive chip angle helps the blade progress rapidly through solid wood without excessive pushing force.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eLess chip congestion: \u003c\/strong\u003eLarge gullets minimise packing between the teeth during long grain cuts.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eExcellent solid-wood performance: \u003c\/strong\u003eDesigned specifically around the demands of ripping hardwood and softwood rather than compromising between many different materials.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eQuick blade changes: \u003c\/strong\u003eThe CS 50 FastFix system makes switching between rip, universal and fine-cut blades fast and convenient.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eLong working life: \u003c\/strong\u003eRobust carbide teeth withstand demanding professional use and offer good resharpening potential.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eCorrect blade at a glance: \u003c\/strong\u003eFestool's yellow colour coding immediately identifies the blade as a woodworking blade.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eProfessional productivity: \u003c\/strong\u003eParticularly useful where substantial quantities of solid timber must be dimensioned efficiently.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\r\n  \u003ch4\u003eApplication\u003c\/h4\u003e\r\n  \u003cul class=\"sideline-bullet\"\u003e\r\n    \u003cli\u003eFast longitudinal cuts in solid wood.\u003c\/li\u003e\r\n    \u003cli\u003eRip cutting with the grain.\u003c\/li\u003e\r\n    \u003cli\u003eCutting hardwood.\u003c\/li\u003e\r\n    \u003cli\u003eCutting softwood.\u003c\/li\u003e\r\n    \u003cli\u003eRipping solid timber boards.\u003c\/li\u003e\r\n    \u003cli\u003eDimensioning timber stock.\u003c\/li\u003e\r\n    \u003cli\u003eFurniture manufacture.\u003c\/li\u003e\r\n    \u003cli\u003eCabinetmaking and joinery.\u003c\/li\u003e\r\n    \u003cli\u003eInterior fitting.\u003c\/li\u003e\r\n    \u003cli\u003eGeneral solid-wood processing with the Festool CS 50.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003c!-- Specifications TAB --\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003ctable class=\"table SpecsTable\"\u003e\r\n  \u003cthead\u003e\r\n    \u003ctr\u003e\r\n      \u003cth class=\"SpecsSubHeading\"\u003eDescription\u003c\/th\u003e\r\n      \u003cth class=\"SpecsSubHeading\"\u003eSpec\u003c\/th\u003e\r\n    \u003c\/tr\u003e\r\n  \u003c\/thead\u003e\r\n  \u003ctbody\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eBrand\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003eFestool\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eCat No.\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003eFES492049\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eFestool Order No.\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003e492049\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eProduct Type\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003eRip-Cut Circular Saw Blade\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eModel\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003eHW 190x2,6 FF PW16\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eBlade Range\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003eWOOD RIP CUT\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eCutting Material\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003eCarbide (HW)\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eBlade Diameter\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003e190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eCutting Width \/ Kerf\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003e2.60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eStandard Blade Thickness\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003e1.80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eMounting Interface\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003eFF FastFix\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eMounting Type\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003eFestool Star-Shaped Interface\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eNumber of Teeth\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eTooth Shape\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003ePW\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eChip Angle\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003e28°\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003ePrimary Cutting Type\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003eLongitudinal \/ Rip Cuts with the Grain\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eSuitable Materials\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003eSolid Hardwood and Softwood\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eFestool Colour Code\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003eYellow - Wood\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eCompatible Machine\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003eFestool PRECISIO CS 50\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eEAN \/ Barcode\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003e4014549033623\u003c\/td\u003e\n\u003c\/tr\u003e\r\n    \u003ctr\u003e\n\u003ctd class=\"SpecLeft\"\u003eQuantity\u003c\/td\u003e\n\u003ctd class=\"SpecRight\"\u003e1 Piece\u003c\/td\u003e\n\u003c\/tr\u003e\r\n  \u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\r\n\u003cdiv class=\"product-in-the-box\"\u003e\r\n  \u003ch3\u003eScope of Delivery:\u003c\/h3\u003e\r\n  \u003cul class=\"sideline-bullet\"\u003e\r\n    \u003cli\u003e1 x Festool HW 190x2,6 FF PW16 WOOD RIP CUT saw blade\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eVideo\u003c\/h2\u003e\n\u003c!-- Video for Festool Saw Blades --\u003e\r\n\u003cdiv style=\"text-align: center\" class=\"embed-responsive embed-responsive-16by9\"\u003e\r\n\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv style=\"text-align: center; margin-top: 30px;\" class=\"embed-responsive embed-responsive-16by9\"\u003e\r\n\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv style=\"text-align: center; margin-top: 40px;\" class=\"embed-responsive embed-responsive-16by9\"\u003e\r\n\r\n\u003c\/div\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eExtra Info\u003c\/h2\u003e\n\u003c!-- Extra Information TAB --\u003e\r\n\u003ch4\u003eExtra Information\u003c\/h4\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eWhat does HW mean?\u003c\/strong\u003e HW is Festool's designation for carbide cutting material. Carbide provides the hardness and wear resistance required for professional circular-saw blades.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eWhat does 190x2,6 mean?\u003c\/strong\u003e The blade has a 190 mm outside diameter and produces a nominal 2.6 mm-wide cut or kerf.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eWhat does FF mean?\u003c\/strong\u003e FF denotes Festool's \u003cstrong\u003eFastFix interface\u003c\/strong\u003e. Instead of a conventional circular centre bore, the blade has a distinctive star-shaped connection matched to the Festool CS 50.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eWhat does PW16 mean?\u003c\/strong\u003e PW identifies Festool's dedicated rip-cut tooth geometry, while 16 is the total number of teeth on the blade.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eWhy only 16 teeth?\u003c\/strong\u003e Rip cutting creates relatively large chips. Fewer teeth leave much larger spaces between them, giving those chips room to escape and allowing the blade to cut quickly without becoming overloaded.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eWhy is the chip angle 28°?\u003c\/strong\u003e The strongly positive cutting angle makes the blade particularly efficient at feeding through solid timber in the grain direction, supporting rapid work progress with relatively low feed force.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eWhy is the blade body thinner than the kerf?\u003c\/strong\u003e The blade body measures 1.8 mm while the teeth cut a 2.6 mm-wide path. This clearance prevents the steel body from rubbing continuously against the sides of the cut.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eWhy FastFix instead of a conventional bore?\u003c\/strong\u003e The specialised star-shaped mount forms part of the CS 50 blade-change system, allowing compatible blades to be changed rapidly without the conventional arbor arrangement used on many circular saws.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eFestool colour coding:\u003c\/strong\u003e Yellow identifies Festool accessories intended for cutting wood, helping the correct blade to be selected quickly.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eHistorically known as the Panther blade:\u003c\/strong\u003e Earlier Festool catalogues referred to this high-performance rip-cut family as the Panther saw-blade range. The current Festool designation is \u003cstrong\u003eWOOD RIP CUT\u003c\/strong\u003e.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cdiv class=\"definition-products\"\u003e\r\n  \u003cstrong\u003eRip blade versus universal or fine-cut blade\u003c\/strong\u003e\r\n  \u003cp\u003eThe PW16 is deliberately specialised. Its 16 widely spaced teeth remove timber aggressively and clear long chips efficiently, making it ideal for sawing with the grain. A universal blade uses more teeth to balance cutting speed and finish quality, while a fine-cut blade uses many closely spaced teeth for clean cross-cuts and decorative panels. For fast solid-wood ripping on the CS 50, the PW16 is the purpose-designed choice.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"definition-products\"\u003e\r\n  \u003cstrong\u003eWhy tooth spacing matters\u003c\/strong\u003e\r\n  \u003cp\u003eWhen ripping along the grain, each tooth can remove a comparatively large chip. If the blade has too many closely spaced teeth, those chips have less room to escape and cutting resistance can increase. The generous gullets of the PW16 carry chips away efficiently, which is one of the main reasons this blade can achieve fast cutting progress with relatively little effort.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003c!-- Pro Tip --\u003e\r\n\u003cdiv class=\"tip-products\"\u003e\r\n  \u003ch4\u003ePro Tips\u003c\/h4\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003eChoose the PW16 when cutting predominantly \u003cstrong\u003ewith the grain\u003c\/strong\u003e. For clean cross-cuts, switch to the appropriate universal or fine-cut CS 50 blade.\u003c\/li\u003e\r\n    \u003cli\u003eAllow the blade to cut at its natural rate rather than forcing the workpiece aggressively through the saw.\u003c\/li\u003e\r\n    \u003cli\u003eKeep the carbide teeth clean. Resin build-up increases friction and can make a sharp blade feel blunt.\u003c\/li\u003e\r\n    \u003cli\u003eUse a steady feed rate. Pausing unnecessarily during a cut can encourage burning, particularly in resinous timber.\u003c\/li\u003e\r\n    \u003cli\u003eSupport long boards properly before and after the saw so the timber remains stable throughout the rip cut.\u003c\/li\u003e\r\n    \u003cli\u003eAlways use the CS 50 fence, riving knife and protective equipment as specified for the cutting operation.\u003c\/li\u003e\r\n    \u003cli\u003eIf ripping hardwood, reduce the feed speed slightly rather than applying excessive pressure.\u003c\/li\u003e\r\n    \u003cli\u003eWhen cutting wet, resinous or particularly fibrous timber, inspect and clean the blade more frequently.\u003c\/li\u003e\r\n    \u003cli\u003eA noticeable increase in feed force or burning often indicates resin build-up or dull carbide teeth.\u003c\/li\u003e\r\n    \u003cli\u003eHave the blade professionally resharpened when necessary rather than continuing to use a dull blade.\u003c\/li\u003e\r\n    \u003cli\u003eStore the blade so the carbide tips cannot strike other saw blades or metal tools.\u003c\/li\u003e\r\n    \u003cli\u003eUse effective extraction on the CS 50 to remove the high volume of chips generated during ripping.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003c!-- How to use --\u003e\r\n\u003cdiv class=\"product-instructions\"\u003e\r\n  \u003ch3\u003eHow to Use\u003c\/h3\u003e\r\n  \u003cul class=\"numbered-list\"\u003e\r\n    \u003cli\u003eDisconnect the CS 50 from the mains supply before changing the saw blade.\u003c\/li\u003e\r\n    \u003cli\u003eAccess the blade-change mechanism according to the Festool CS 50 operating instructions.\u003c\/li\u003e\r\n    \u003cli\u003eUse the machine's FastFix system to release the installed blade.\u003c\/li\u003e\r\n    \u003cli\u003eInspect the HW 190x2,6 FF PW16 for damaged, cracked or missing carbide teeth before installation.\u003c\/li\u003e\r\n    \u003cli\u003eMake sure the FastFix mounting surfaces are clean and free from resin, chips and debris.\u003c\/li\u003e\r\n    \u003cli\u003eFit the blade in the correct direction of rotation.\u003c\/li\u003e\r\n    \u003cli\u003eSecure the blade completely using the CS 50 FastFix mechanism.\u003c\/li\u003e\r\n    \u003cli\u003eCheck that all guards, the riving knife and other safety components are correctly positioned.\u003c\/li\u003e\r\n    \u003cli\u003eAdjust the cutting height to suit the thickness of the timber.\u003c\/li\u003e\r\n    \u003cli\u003eSet the rip fence accurately for the required workpiece width.\u003c\/li\u003e\r\n    \u003cli\u003eConnect suitable dust and chip extraction.\u003c\/li\u003e\r\n    \u003cli\u003eSupport the workpiece correctly, particularly when ripping long or heavy boards.\u003c\/li\u003e\r\n    \u003cli\u003eStart the saw and allow the blade to reach operating speed.\u003c\/li\u003e\r\n    \u003cli\u003eFeed the timber smoothly through the cut in the grain direction using controlled pressure.\u003c\/li\u003e\r\n    \u003cli\u003eUse appropriate push sticks or other safety devices whenever required by the machine instructions.\u003c\/li\u003e\r\n    \u003cli\u003eWait until the blade has stopped completely before making adjustments or removing trapped offcuts.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003c!-- Safety TAB --\u003e\r\n\u003cdiv class=\"product-safety\"\u003e\r\n  \u003ch4\u003eSafety\u003c\/h4\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003eUse this blade only with the \u003cstrong\u003eFestool PRECISIO CS 50\u003c\/strong\u003e and its correct FF FastFix mounting system.\u003c\/li\u003e\r\n    \u003cli\u003eDisconnect the saw from the mains supply before installing, removing, cleaning or inspecting the blade.\u003c\/li\u003e\r\n    \u003cli\u003eWear suitable \u003cstrong\u003eeye, hearing and respiratory protection\u003c\/strong\u003e during sawing.\u003c\/li\u003e\r\n    \u003cli\u003eInspect the blade before every use for cracked, chipped, loose or missing carbide teeth.\u003c\/li\u003e\r\n    \u003cli\u003eNever use a warped, cracked or otherwise damaged blade.\u003c\/li\u003e\r\n    \u003cli\u003eMake sure the blade is installed in the correct direction of rotation.\u003c\/li\u003e\r\n    \u003cli\u003eCheck that the FastFix mounting interface is fully secured before starting the saw.\u003c\/li\u003e\r\n    \u003cli\u003eUse the CS 50's riving knife, guard, fence and other specified safety devices.\u003c\/li\u003e\r\n    \u003cli\u003eSupport long and heavy timber correctly so it cannot twist, tip or close the kerf around the blade.\u003c\/li\u003e\r\n    \u003cli\u003eUse push sticks, push blocks or other appropriate feeding aids when required.\u003c\/li\u003e\r\n    \u003cli\u003eKeep hands well clear of the blade and cutting path.\u003c\/li\u003e\r\n    \u003cli\u003eDo not stand directly in the potential kickback path of the workpiece.\u003c\/li\u003e\r\n    \u003cli\u003eNever force a workpiece through a stalled or slowing blade.\u003c\/li\u003e\r\n    \u003cli\u003eAllow the blade to reach full operating speed before feeding timber into the cut.\u003c\/li\u003e\r\n    \u003cli\u003eWait for the blade to stop completely before making adjustments or removing trapped material.\u003c\/li\u003e\r\n    \u003cli\u003eDo not exceed the machine or blade manufacturer's permitted operating conditions.\u003c\/li\u003e\r\n    \u003cli\u003eUse suitable extraction because rip cutting can generate a substantial quantity of wood chips and fine dust.\u003c\/li\u003e\r\n    \u003cli\u003eHave carbide saw blades sharpened or repaired only by suitably qualified specialists.\u003c\/li\u003e\r\n    \u003cli\u003eRead and follow all Festool CS 50 and saw-blade operating and safety instructions before use.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Saddle Creek","offers":[{"title":"Default Title","offer_id":67501554729250,"sku":"FES492049","price":2899.73,"currency_code":"ZAR","in_stock":false}],"url":"https:\/\/saddlecreek.co.za\/products\/festool-hw-190x2-6-ff-pw16-wood-rip-cut-190mm-16-tooth-saw-blade","provider":"Saddle Creek","version":"1.0","type":"link"}