{"product_id":"masonry-cutting-disc-115-x-2-5-x-22-22mm","title":"Masonry Cutting Disc 115 x 2.5 x 22.22mm","description":"\u003c!-- Description --\u003e\r\n\u003ch3\u003eTork Craft Masonry Cutting Disc 115 x 2.5 x 22.22 mm\u003c\/h3\u003e\r\n\u003cp class=\"feature_box\"\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e 115 mm masonry cutting disc with a 2.5 mm thickness and resin-bonded silicon carbide abrasive for cutting brick, concrete and stone.\u003c\/p\u003e\r\n\u003cp itemprop=\"description\"\u003eGet your masonry cutting projects moving with the Tork Craft ABR115M-4. Designed for compatible 115 mm angle grinders, this abrasive cutting disc uses silicon carbide held in a resin bond to cut through brick, concrete and stone. Its 2.5 mm thickness makes it a practical choice for sizing masonry pieces, trimming material during renovations and making straight cuts for building work. Whether you are preparing bricks to fit an opening or cutting stone for a repair, this disc brings a dedicated masonry cutting option to your grinder. It is intended for cutting with the disc edge; use the correct cutting guard, suitable dust extraction and a steady cutting technique to get the job done safely.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"definition-products\"\u003e\r\n  \u003cstrong\u003eSilicon carbide abrasive for masonry cutting\u003c\/strong\u003e\r\n  \u003cp\u003eThe abrasive formulation is selected for masonry materials. Silicon carbide grains perform the cutting action while the resin bond holds the abrasive together. The ABR115M-4 is a cutting disc, and its 2.5 mm thickness does not make it suitable for side grinding or surface finishing.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"product-highlights\"\u003e\r\n  \u003ch3\u003eProduct highlights\u003c\/h3\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eDedicated masonry application:\u003c\/strong\u003e Designed for cutting brick, concrete and stone.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e115 mm diameter:\u003c\/strong\u003e Suitable for angle grinders approved to use this disc size and mounting arrangement.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e2.5 mm thickness:\u003c\/strong\u003e Clearly specified cutting profile for selecting the correct disc for your job.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eResin-bonded silicon carbide:\u003c\/strong\u003e Combines a masonry abrasive with a resin bond.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eMaximum speed of 13,300 rpm:\u003c\/strong\u003e Check the grinder's rated maximum speed against the disc rating before use.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"product-compatibility\"\u003e\r\n  \u003ch3\u003eCompatibility\u003c\/h3\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eAngle grinders:\u003c\/strong\u003e Compatible with suitable 115 mm angle grinders that accept the disc's bore, thickness and approved flange arrangement.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eMounting size:\u003c\/strong\u003e The supplier specifies a 22.23 mm bore, also listed in the product title as 22.22 mm. This is the nominal 7\/8-inch mounting size.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eWorkpiece materials:\u003c\/strong\u003e Intended for masonry cutting, including brick, concrete and stone.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eCutting accessories:\u003c\/strong\u003e Use the grinder manufacturer's approved cutting guard and, where available, a compatible dust extraction shroud.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\u003csection\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003c!-- Features and Benefits TAB --\u003e\r\n\u003cdiv class=\"product-features\"\u003e\r\n  \u003ch4\u003eFeatures\u003c\/h4\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eSilicon carbide abrasive:\u003c\/strong\u003e Selected for cutting masonry materials.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eResin bond:\u003c\/strong\u003e Holds the abrasive grains together within the disc.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e115 x 2.5 mm disc:\u003c\/strong\u003e Compact diameter with a 2.5 mm cutting profile.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eNominal 7\/8-inch bore:\u003c\/strong\u003e Supplier specification of 22.23 mm, listed as 22.22 mm in the product name.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eCutting-only design:\u003c\/strong\u003e Intended for straight cuts using the disc edge.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\r\n  \u003ch4\u003eBenefits\u003c\/h4\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eChoose the right abrasive:\u003c\/strong\u003e A dedicated masonry disc helps you match your cutting accessory to brick, concrete and stone.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eUseful for building and renovation:\u003c\/strong\u003e Suitable for preparing masonry pieces to fit planned sizes and openings.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003ePractical grinder accessory:\u003c\/strong\u003e Adds masonry cutting capability to a compatible 115 mm angle grinder.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eClear selection details:\u003c\/strong\u003e Published disc dimensions and speed markings help you check suitability before installation.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\r\n  \u003ch4\u003eApplication\u003c\/h4\u003e\r\n  \u003cul class=\"sideline-bullet\"\u003e\r\n    \u003cli\u003eCutting bricks to size for building and repair work.\u003c\/li\u003e\r\n    \u003cli\u003eMaking straight cuts in concrete within the grinder's permitted cutting capacity.\u003c\/li\u003e\r\n    \u003cli\u003eCutting stone pieces for fitting and renovation tasks.\u003c\/li\u003e\r\n    \u003cli\u003eMaking cuts for masonry wall chasing where the grinder, guard and dust extraction arrangement are approved for the operation.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003c!-- Specifications TAB --\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003ctable class=\"table SpecsTable\"\u003e\r\n    \u003cthead\u003e\r\n        \u003ctr\u003e\r\n            \u003cth class=\"SpecsSubHeading\"\u003eDescription\u003c\/th\u003e\r\n            \u003cth class=\"SpecsSubHeading\"\u003eSpec\u003c\/th\u003e\r\n        \u003c\/tr\u003e\r\n    \u003c\/thead\u003e\r\n    \u003ctbody\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eBrand\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003eTork Craft\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eCat No.\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003eABR115M-4\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eProduct Type\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003eAbrasive masonry cutting disc\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eBarcode\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003e6009515818517\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eDisc Diameter\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003e115 mm\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eDisc Thickness\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003e2.5 mm\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eBore Diameter\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003e22.23 mm, nominal 7\/8-inch bore; listed as 22.22 mm in the product title\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eAbrasive Material\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003eSilicon carbide\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eBond Type\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003eResin\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eMaximum Rotational Speed\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003e13,300 rpm\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eMaximum Peripheral Speed\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003e80 m\/s\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eSuitable Materials\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003eBrick, concrete and stone\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eCompatible Tool\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003eSuitable 115 mm angle grinder\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n        \u003ctr\u003e\r\n            \u003ctd class=\"SpecLeft\"\u003eIntended Operation\u003c\/td\u003e\r\n            \u003ctd class=\"SpecRight\"\u003eMasonry cutting only\u003c\/td\u003e\r\n        \u003c\/tr\u003e\r\n    \u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\r\n\u003cdiv class=\"product-in-the-box\"\u003e\r\n    \u003ch3\u003ePackaging\u003c\/h3\u003e\r\n    \u003cul class=\"sideline-bullet\"\u003e\r\n        \u003cli\u003eTork Craft ABR115M-4 Masonry Cutting Disc, 115 x 2.5 x 22.22 mm.\u003c\/li\u003e\r\n        \u003cli\u003eSupplier pack size: 10 discs.\u003c\/li\u003e\r\n    \u003c\/ul\u003e\r\n\u003c\/div\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eExtra Info\u003c\/h2\u003e\n\u003c!-- Extra Information TAB --\u003e\r\n\u003ch4\u003eExtra Information\u003c\/h4\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eBore measurement:\u003c\/strong\u003e The product title states 22.22 mm, while the supplier specifications and disc label state 22.23 mm. Both describe the nominal 7\/8-inch mounting size; confirm the correct fit with your grinder's mounting flanges.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eAbrasive cutting action:\u003c\/strong\u003e The disc removes material through abrasion and gradually wears down during use.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eCutting capacity:\u003c\/strong\u003e Available cutting depth depends on the grinder, guard, flange arrangement and remaining disc diameter.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eDust control:\u003c\/strong\u003e Cutting brick, concrete and stone can release respirable crystalline silica. Use suitable extraction and appropriate respiratory protection.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Keep discs dry and protected from impact, moisture and excessive heat. Observe any expiry date marked on the disc.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"note_box\"\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This disc is designed for masonry cutting only. Do not use its side face for grinding, and do not twist it in the cut.\u003c\/p\u003e\r\n\r\n\u003c!-- Pro Tip --\u003e\r\n\u003cdiv class=\"tip-products\"\u003e\r\n  \u003ch4\u003ePro Tips\u003c\/h4\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eAllow for the cut width:\u003c\/strong\u003e Mark the finished dimension clearly and position the cut on the waste side of the line.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eStart with a controlled pass:\u003c\/strong\u003e Establish the cut line with a shallow pass before increasing depth, keeping the disc aligned throughout.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eSupport the material:\u003c\/strong\u003e Secure the workpiece so it cannot move or close onto the disc as the cut progresses.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eLet the abrasive work:\u003c\/strong\u003e Apply steady, moderate feed pressure. Forcing the grinder increases the risk of binding and disc damage.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eClean up with dust control:\u003c\/strong\u003e Use a suitable dust extractor for fine masonry dust. Avoid dry sweeping or blowing dust into the air.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003c!-- How to Use --\u003e\r\n\u003cdiv class=\"product-instructions\"\u003e\r\n  \u003ch3\u003eHow to Use\u003c\/h3\u003e\r\n  \u003cul class=\"numbered-list\"\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eCheck suitability:\u003c\/strong\u003e Confirm that the material, disc diameter, bore and thickness suit the grinder. The grinder's rated maximum speed must not exceed the disc's 13,300 rpm rating.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eDisconnect the power:\u003c\/strong\u003e Switch off and unplug the grinder, or remove its battery, before fitting the disc.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eInspect and mount:\u003c\/strong\u003e Reject cracked, chipped, damaged or expired discs. Fit the disc with the correct flanges and tighten it according to the grinder manufacturer's instructions.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003ePrepare the grinder:\u003c\/strong\u003e Fit the approved cutting guard and auxiliary handle. Connect a compatible cutting shroud and suitable dust extractor where the equipment permits.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003ePrepare the work area:\u003c\/strong\u003e Mark the cut and secure the material with suitable support. Before cutting walls, check for concealed electrical cables and pipes.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eStart safely:\u003c\/strong\u003e Wear appropriate protective equipment, hold the grinder with both hands and run it clear of the workpiece. Check for abnormal vibration before beginning the cut.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eMake the cut:\u003c\/strong\u003e Allow the grinder to reach operating speed, then guide the disc along the marked line with steady pressure. Keep it straight and avoid twisting or sideways loading.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eFinish safely:\u003c\/strong\u003e Withdraw the disc from the cut, switch off and wait until it has stopped completely before putting the grinder down. Disconnect the power before removing or replacing the disc.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003c!-- Safety TAB --\u003e\r\n\u003cdiv class=\"product-safety\"\u003e\r\n  \u003ch4\u003eSafety\u003c\/h4\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003eWear \u003cstrong\u003eeye, ear and respiratory protection\u003c\/strong\u003e. Use safety glasses with a suitable face shield, hearing protection and respiratory protection appropriate for masonry and silica dust.\u003c\/li\u003e\r\n    \u003cli\u003eUse \u003cstrong\u003esuitable dust extraction\u003c\/strong\u003e. Respiratory protection must fit correctly and form part of an effective dust control arrangement.\u003c\/li\u003e\r\n    \u003cli\u003eWear suitable gloves, protective footwear and close-fitting clothing. Keep loose clothing, jewellery and hair away from rotating parts.\u003c\/li\u003e\r\n    \u003cli\u003eKeep the approved cutting guard and auxiliary handle fitted. Hold the grinder firmly with both hands.\u003c\/li\u003e\r\n    \u003cli\u003eNever exceed the disc's \u003cstrong\u003e13,300 rpm maximum speed\u003c\/strong\u003e. Check the rating marked on the actual disc before use.\u003c\/li\u003e\r\n    \u003cli\u003eInspect the disc before fitting it. Do not use a cracked, chipped, damaged or expired disc, and never alter its mounting hole.\u003c\/li\u003e\r\n    \u003cli\u003eCut with the disc edge only. Do not side grind, bend, twist or force the disc through the material.\u003c\/li\u003e\r\n    \u003cli\u003eIf the disc binds, switch off and hold the grinder still until rotation stops. Correct the cause before continuing, and do not restart with the disc trapped in the cut.\u003c\/li\u003e\r\n    \u003cli\u003eCheck walls for concealed cables and pipes before cutting. Keep bystanders clear of debris and the dust exposure area.\u003c\/li\u003e\r\n    \u003cli\u003eDo not introduce water unless both the disc and grinder are specifically approved for wet cutting.\u003c\/li\u003e\r\n    \u003cli\u003eWait for the disc to stop completely before placing the grinder down. Disconnect the power before accessory changes or adjustments.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Saddle Creek","offers":[{"title":"Default Title","offer_id":67524388880674,"sku":"ABR115M-4","price":19.21,"currency_code":"ZAR","in_stock":false}],"url":"https:\/\/saddlecreek.co.za\/products\/masonry-cutting-disc-115-x-2-5-x-22-22mm","provider":"Saddle Creek","version":"1.0","type":"link"}