{"product_id":"masonry-cutting-disc-115-x-3-0-x-22-22mm","title":"Masonry Cutting Disc 115 x 3.0 x 22.22mm","description":"\u003c!-- Description --\u003e\r\n\u003ch3\u003eTork Craft Masonry Cutting Disc 115 x 3.0 x 22.22 mm\u003c\/h3\u003e\r\n\r\n\u003cp class=\"feature_box\"\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e 115 mm masonry cutting disc with a 3.0 mm thickness. Resin-bonded silicon carbide abrasive for cutting brick, concrete and stone using a compatible angle grinder. Maximum speed: 13,300 rpm.\u003c\/p\u003e\r\n\r\n\u003cp itemprop=\"description\"\u003eKeep your building and renovation projects moving with the \u003cstrong\u003eTork Craft ABR115M-3 Masonry Cutting Disc\u003c\/strong\u003e. Designed for compatible 115 mm angle grinders, this disc provides a practical cutting option for preparing brick, concrete and stone pieces within the tool's cutting capacity. Its \u003cstrong\u003e3.0 mm thickness\u003c\/strong\u003e identifies the thicker cutting profile in this masonry range, while silicon carbide abrasive held in a resin bond performs the material-removal action. From trimming a brick for a better fit to sizing a suitable stone component, the ABR115M-3 is a useful accessory for construction, repair and general masonry preparation.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"definition-products\"\u003e\r\n  \u003cstrong\u003eDedicated masonry cutting with a 3.0 mm profile\u003c\/strong\u003e\r\n  \u003cp\u003eThe ABR115M-3 uses silicon carbide abrasive to cut suitable masonry materials along its rotating outer edge. Its 3.0 mm thickness contributes to the width of material removed during cutting, so allow for the cutting path when marking components to size. Keep the disc aligned with the cut and maintain controlled feed pressure.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"product-highlights\"\u003e\r\n  \u003ch3\u003eProduct highlights\u003c\/h3\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eMasonry applications:\u003c\/strong\u003e Suitable for cutting brick, concrete and stone.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e3.0 mm thickness:\u003c\/strong\u003e A clearly specified cutting profile for selecting the right disc for your task.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e115 mm diameter:\u003c\/strong\u003e Sized for angle grinders approved to accept this disc diameter and type.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eSilicon carbide abrasive:\u003c\/strong\u003e An abrasive material suited to masonry cutting.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eResin bond:\u003c\/strong\u003e Holds the abrasive grains together in the cutting disc.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eDedicated cutting function:\u003c\/strong\u003e Intended for straight material separation using the outer edge.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"product-compatibility\"\u003e\r\n  \u003ch3\u003eCompatibility\u003c\/h3\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eAngle grinders:\u003c\/strong\u003e For machines approved to use 115 mm bonded abrasive cutting discs with a 3.0 mm thickness.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eMounting components:\u003c\/strong\u003e Use the grinder manufacturer's correct flanges and retaining nut for the disc's bore and profile.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eSpeed rating:\u003c\/strong\u003e The grinder's rated maximum speed must not exceed the disc's 13,300 rpm limit.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eCutting guard:\u003c\/strong\u003e Fit the protective guard specified by the grinder manufacturer for abrasive cutting.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eDust extraction:\u003c\/strong\u003e Use a compatible cutting shroud and suitable extractor for masonry dust.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\u003csection\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003c!-- Features and Benefits TAB --\u003e\r\n\u003cdiv class=\"product-features\"\u003e\r\n  \u003ch4\u003eFeatures\u003c\/h4\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eMasonry cutting formulation:\u003c\/strong\u003e Resin-bonded silicon carbide abrasive for the specified materials.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e3.0 mm disc thickness:\u003c\/strong\u003e A thicker profile within the 115 mm masonry cutting range.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003e115 mm outside diameter:\u003c\/strong\u003e Compatible with suitable compact angle grinders.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eConventional centre bore:\u003c\/strong\u003e For mounting with compatible angle grinder flanges.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\r\n  \u003ch4\u003eBenefits\u003c\/h4\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eUseful fitting adjustments:\u003c\/strong\u003e Cut masonry pieces to suit installation, repair and renovation work.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003ePractical material coverage:\u003c\/strong\u003e Suitable for several common masonry materials.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eConvenient tool setup:\u003c\/strong\u003e Use with an approved angle grinder and the correct cutting accessories.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eStraightforward replacement:\u003c\/strong\u003e Cat No. ABR115M-3 identifies the 3.0 mm version when replenishing supplies.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\r\n  \u003ch4\u003eApplication\u003c\/h4\u003e\r\n  \u003cul class=\"sideline-bullet\"\u003e\r\n    \u003cli\u003eTrimming bricks for fitting and repair work.\u003c\/li\u003e\r\n    \u003cli\u003eCutting suitable concrete components within the grinder's capacity.\u003c\/li\u003e\r\n    \u003cli\u003eSizing stone pieces for installation and adjustment.\u003c\/li\u003e\r\n    \u003cli\u003eMaking cuts for wall chasing where the tool, guard and extraction setup are approved for the task.\u003c\/li\u003e\r\n    \u003cli\u003eGeneral masonry cutting during building, maintenance and renovation projects.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003c!-- Specifications TAB --\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003ctable class=\"table SpecsTable\"\u003e\r\n  \u003cthead\u003e\r\n    \u003ctr\u003e\r\n      \u003cth class=\"SpecsSubHeading\"\u003eDescription\u003c\/th\u003e\r\n      \u003cth class=\"SpecsSubHeading\"\u003eSpec\u003c\/th\u003e\r\n    \u003c\/tr\u003e\r\n  \u003c\/thead\u003e\r\n  \u003ctbody\u003e\r\n    \u003ctr\u003e\r\n      \u003ctd class=\"SpecLeft\"\u003eBrand\u003c\/td\u003e\r\n      \u003ctd class=\"SpecRight\"\u003eTork Craft\u003c\/td\u003e\r\n    \u003c\/tr\u003e\r\n    \u003ctr\u003e\r\n      \u003ctd class=\"SpecLeft\"\u003eCat No.\u003c\/td\u003e\r\n      \u003ctd class=\"SpecRight\"\u003eABR115M-3\u003c\/td\u003e\r\n    \u003c\/tr\u003e\r\n    \u003ctr\u003e\r\n      \u003ctd class=\"SpecLeft\"\u003eProduct Type\u003c\/td\u003e\r\n      \u003ctd class=\"SpecRight\"\u003eAbrasive masonry cutting disc\u003c\/td\u003e\r\n    \u003c\/tr\u003e\r\n    \u003ctr\u003e\r\n      \u003ctd class=\"SpecLeft\"\u003eBarcode\u003c\/td\u003e\r\n      \u003ctd class=\"SpecRight\"\u003e6009515816353\u003c\/td\u003e\r\n    \u003c\/tr\u003e\r\n    \u003ctr\u003e\r\n      \u003ctd class=\"SpecLeft\"\u003eDisc Diameter\u003c\/td\u003e\r\n      \u003ctd class=\"SpecRight\"\u003e115 mm\u003c\/td\u003e\r\n    \u003c\/tr\u003e\r\n    \u003ctr\u003e\r\n      \u003ctd class=\"SpecLeft\"\u003eDisc Thickness\u003c\/td\u003e\r\n      \u003ctd class=\"SpecRight\"\u003e3.0 mm\u003c\/td\u003e\r\n    \u003c\/tr\u003e\r\n    \u003ctr\u003e\r\n      \u003ctd class=\"SpecLeft\"\u003eBore Diameter\u003c\/td\u003e\r\n      \u003ctd class=\"SpecRight\"\u003e22.23 mm (nominal 7\/8-inch bore; listed as 22.22 mm)\u003c\/td\u003e\r\n    \u003c\/tr\u003e\r\n    \u003ctr\u003e\r\n      \u003ctd class=\"SpecLeft\"\u003eMaximum Rotational Speed\u003c\/td\u003e\r\n      \u003ctd class=\"SpecRight\"\u003e13,300 rpm\u003c\/td\u003e\r\n    \u003c\/tr\u003e\r\n    \u003ctr\u003e\r\n      \u003ctd class=\"SpecLeft\"\u003eAbrasive Material\u003c\/td\u003e\r\n      \u003ctd class=\"SpecRight\"\u003eSilicon carbide\u003c\/td\u003e\r\n    \u003c\/tr\u003e\r\n    \u003ctr\u003e\r\n      \u003ctd class=\"SpecLeft\"\u003eBond\u003c\/td\u003e\r\n      \u003ctd class=\"SpecRight\"\u003eResin\u003c\/td\u003e\r\n    \u003c\/tr\u003e\r\n    \u003ctr\u003e\r\n      \u003ctd class=\"SpecLeft\"\u003eSuitable Materials\u003c\/td\u003e\r\n      \u003ctd class=\"SpecRight\"\u003eBrick, concrete and stone\u003c\/td\u003e\r\n    \u003c\/tr\u003e\r\n    \u003ctr\u003e\r\n      \u003ctd class=\"SpecLeft\"\u003eCompatible Tool\u003c\/td\u003e\r\n      \u003ctd class=\"SpecRight\"\u003eSuitable 115 mm angle grinder\u003c\/td\u003e\r\n    \u003c\/tr\u003e\r\n    \u003ctr\u003e\r\n      \u003ctd class=\"SpecLeft\"\u003eIntended Operation\u003c\/td\u003e\r\n      \u003ctd class=\"SpecRight\"\u003eMasonry cutting only\u003c\/td\u003e\r\n    \u003c\/tr\u003e\r\n  \u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\r\n\u003cdiv class=\"product-in-the-box\"\u003e\r\n  \u003ch3\u003ePackaging\u003c\/h3\u003e\r\n  \u003cul class=\"sideline-bullet\"\u003e\r\n    \u003cli\u003e1 x Tork Craft ABR115M-3 Masonry Cutting Disc, 115 x 3.0 x 22.22 mm, per unit ordered.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n  \u003cp class=\"note_box\"\u003e\u003cstrong\u003ePack size:\u003c\/strong\u003e The supplier pack size is 10 discs. This refers to the recommended ordering quantity and outer-box quantity; the listed unit is one disc.\u003c\/p\u003e\r\n\u003c\/div\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eExtra Info\u003c\/h2\u003e\n\u003c!-- Extra Information TAB --\u003e\r\n\u003ch4\u003eExtra Information\u003c\/h4\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eUnderstanding the dimensions:\u003c\/strong\u003e The listed 115 x 3.0 x 22.22 mm size identifies the outside diameter, disc thickness and centre-bore designation respectively.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eMounting size:\u003c\/strong\u003e The supplier specifications state a 22.23 mm bore. The 22.22 mm and 22.23 mm designations refer to the nominal 7\/8-inch mounting size; always check correct fit on your grinder.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eCutting allowance:\u003c\/strong\u003e Account for the material removed by the disc when measuring and marking a piece that must fit accurately.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eCutting capacity:\u003c\/strong\u003e Maximum cutting depth depends on the grinder, guard and remaining disc diameter. Do not force the tool beyond its permitted capacity.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eDisc wear:\u003c\/strong\u003e The diameter decreases during use. Check the disc regularly and replace it when its condition or remaining size no longer suits the task.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eDust control:\u003c\/strong\u003e Cutting brick, concrete and stone can release fine silica-containing dust. Use effective extraction together with suitable respiratory protection.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp class=\"note_box\"\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This disc is intended for masonry cutting only. Its 3.0 mm thickness does not make it suitable for side grinding, smoothing or surface preparation.\u003c\/p\u003e\r\n\r\n\u003c!-- Pro Tip --\u003e\r\n\u003cdiv class=\"tip-products\"\u003e\r\n  \u003ch4\u003ePro Tips\u003c\/h4\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003eMark the cutting line clearly and position the cut on the waste side of the line when preserving a finished dimension.\u003c\/li\u003e\r\n    \u003cli\u003eSecure the workpiece and begin with a controlled shallow pass to establish the cutting line.\u003c\/li\u003e\r\n    \u003cli\u003eSupport the material so the cut cannot close and pinch the disc.\u003c\/li\u003e\r\n    \u003cli\u003eLet the abrasive do the work. Keep the disc straight and avoid forcing, twisting or levering it.\u003c\/li\u003e\r\n    \u003cli\u003eClean up masonry dust with a suitable extraction system instead of blowing it into the air or dry sweeping it.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003c!-- How to Use --\u003e\r\n\u003cdiv class=\"product-instructions\"\u003e\r\n  \u003ch3\u003eHow to Use\u003c\/h3\u003e\r\n  \u003cul class=\"numbered-list\"\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eCheck suitability:\u003c\/strong\u003e Confirm the material, disc dimensions, mounting arrangement and speed rating match the grinder and intended task.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eDisconnect the power:\u003c\/strong\u003e Unplug the grinder or remove its battery before fitting the disc.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eInspect and mount:\u003c\/strong\u003e Reject cracked, chipped, damaged or expired discs. Fit an undamaged disc with the correct flanges and retaining nut according to the grinder manual.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003ePrepare the equipment:\u003c\/strong\u003e Fit the correct cutting guard and auxiliary handle. Connect compatible dust extraction and check that it operates effectively.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eSecure the material:\u003c\/strong\u003e Mark the cutting line and arrange supports to prevent movement or disc pinching. Check for concealed services before cutting walls.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eStart clear of the workpiece:\u003c\/strong\u003e Wear suitable protective equipment, hold the grinder with both hands and allow the disc to reach operating speed.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eMake the cut:\u003c\/strong\u003e Guide the cutting edge along the marked line with controlled pressure. Maintain straight alignment without twisting the disc.\u003c\/li\u003e\r\n    \u003cli\u003e\n\u003cstrong\u003eFinish safely:\u003c\/strong\u003e Switch off and wait for the disc to stop completely before putting the grinder down. Disconnect the power before adjustments or accessory changes.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003c!-- Safety TAB --\u003e\r\n\u003cdiv class=\"product-safety\"\u003e\r\n  \u003ch4\u003eSafety\u003c\/h4\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003eWear \u003cstrong\u003eeye, ear and dust protection\u003c\/strong\u003e, including safety glasses with a face shield and suitable respiratory protection for silica-containing masonry dust.\u003c\/li\u003e\r\n    \u003cli\u003eUse effective dust extraction. Respiratory protection supplements extraction and must fit correctly.\u003c\/li\u003e\r\n    \u003cli\u003eWear suitable gloves, protective footwear and fitted work clothing.\u003c\/li\u003e\r\n    \u003cli\u003eKeep the correct cutting guard and auxiliary handle fitted. Hold the grinder firmly with both hands.\u003c\/li\u003e\r\n    \u003cli\u003eNever exceed \u003cstrong\u003e13,300 rpm\u003c\/strong\u003e. Check the markings on the actual disc before use.\u003c\/li\u003e\r\n    \u003cli\u003eDo not use damaged or expired discs, enlarge the bore or force the disc onto an unsuitable mounting system.\u003c\/li\u003e\r\n    \u003cli\u003eDo not grind with the side face, twist the disc in the cut or apply excessive pressure.\u003c\/li\u003e\r\n    \u003cli\u003eIf the disc binds, switch off and hold the grinder still until rotation stops. Correct the cause before continuing.\u003c\/li\u003e\r\n    \u003cli\u003eDo not restart with the disc inside the workpiece. Allow it to reach operating speed clear of the material before carefully re-entering the cut.\u003c\/li\u003e\r\n    \u003cli\u003eKeep bystanders clear of flying debris and dust. Check for concealed cables and pipes before cutting walls.\u003c\/li\u003e\r\n    \u003cli\u003eDo not apply water or coolant unless both the disc and tool are expressly approved for that method.\u003c\/li\u003e\r\n    \u003cli\u003eFollow the grinder manual and disc markings. Disconnect the power before changing accessories.\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Saddle Creek","offers":[{"title":"Default Title","offer_id":67524388159778,"sku":"ABR115M-3","price":21.05,"currency_code":"ZAR","in_stock":false}],"url":"https:\/\/saddlecreek.co.za\/products\/masonry-cutting-disc-115-x-3-0-x-22-22mm","provider":"Saddle Creek","version":"1.0","type":"link"}