Skeleton text
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Sign up to be the first to know when it's back in stock.
Skeleton text
Saddle Creek
Annular Hole Cutter Hss 58 X 30mm Weld Shank 19.05mm
R 2,524.25
Out of stock
Sign up to be the first to know when it's back in stock.
Tork Craft Annular Hole Cutter — HSS 58 × 30 mm, 19.05 mm (3/4') Weldon Shank
Size: 58 mm x 30 mm [3/4' Weldon Shank]
This 58 mm diameter HSS annular cutter from Tork Craft is built for making large-clearance holes where depth is limited. With a 30 mm cutting depth and robust 19.05 mm (3/4') Weldon shank, it delivers fast, clean broaches with minimal burrs, reduced feed force and consistent performance in steel or cast-iron plate.
Features
Features and Benefits
- Perfect stable start
- Conical surface inside
- Precise centre pilot fitting
- Ground clamp surface
- Faster, because every tooth cuts
- More accurate
- Greater drill depth
- Stronger, therefore less fragile
- Guaranteed slug ejection
At a glance
- Annular Cutters drill a burr-free finished hole by cutting only the material around the periphery of the hole. This forms a solid slug which will fall out.
- Less time and energy are consumed per hole
- Faster feed rates are achieved with more cutting teeth and less tool wear
- Lighter, less powerful drilling equipment can be used
- Able to drill holes which are difficult or impossible to do accurately with conventional twist drill tooling - with no pre-drilling or step drilling required.
Specifications
| Description | Specification |
| Packaging Type | Hanging plastic tube |
| Package Dimensions | 113(L)mm x Ø72mm |
| Package Weight | 323g |
| Product Dimensions | 62(L)mm x Ø58mm |
| Product Weight | 280g |
| Material | HSS |
| Finish | Polished |
| Size | Ø58mm |
| Cutting Depth | 30mm |
| Shank | 3/4" (19.05mm) Weldon shank compatible with most magnetic base drills. |
| Recommended accessories/tools | Mag base drill machines (TCMD00__) |
| TCAC0004 for 30mm long cutters | |
| TCAC0005 for 55mm long cutters | |
| Warranty | Consumable products excluded from warranty unless confirmed production error. |
| Content | 1 x Annular hole cutter HSS |
Extra Info
General Drilling Tips
-
Always
use coolant when drilling. This will prolong the cutter's life and offer a better
finish. - Slower feed rates will not add life to your cutter but actually reduce the cutter's life. Use firm steady feed pressure throughout cut. This is the Number #1 cause of broken or prematurely dull cutters
- Clean the cutter. Always make sure to clear all chips from your cutter before starting the next hole.
- Know the material characteristics. For harder materials other cutting options should be investigated
- Make sure support system for drill arbor is in place and not worn out. If using on a drill press, a support system must be used.
- Take care that the surface below the magnetic drill is clean and that the work piece is securely attached. Uneven or large build-up of debris and shavings can cause drill slippage. Material being cut should be at least 8mm thick.
- Painted surfaces pose possible slippage if paint build-up does not allow magnet to hold securely.
- When slug ejection becomes unreliable or tool resists cutting, replace your cutter or send in for re-sharpening.
- Always observe standard and specific safety instructions.
- For best performance always maintain your drill as instructed in your tool operator's manual.
Annular Hole Cutter Hss 58 X 30mm Weld Shank 19.05mm
SKU: TCAC058-1
R 2,524.25
Tax included.
Shipping
calculated at checkout.
Out of stock
Sign up to be the first to know when it's back in stock.
Additional details
Specifications
Values
Annular Hole Cutter Hss 58 X 30mm Weld Shank 19.05mm
R 2,524.25
R 2,524.25
Product description
Tork Craft Annular Hole Cutter — HSS 58 × 30 mm, 19.05 mm (3/4') Weldon Shank
Size: 58 mm x 30 mm [3/4' Weldon Shank]
This 58 mm diameter HSS annular cutter from Tork Craft is built for making large-clearance holes where depth is limited. With a 30 mm cutting depth and robust 19.05 mm (3/4') Weldon shank, it delivers fast, clean broaches with minimal burrs, reduced feed force and consistent performance in steel or cast-iron plate.
Features
Features and Benefits
- Perfect stable start
- Conical surface inside
- Precise centre pilot fitting
- Ground clamp surface
- Faster, because every tooth cuts
- More accurate
- Greater drill depth
- Stronger, therefore less fragile
- Guaranteed slug ejection
At a glance
- Annular Cutters drill a burr-free finished hole by cutting only the material around the periphery of the hole. This forms a solid slug which will fall out.
- Less time and energy are consumed per hole
- Faster feed rates are achieved with more cutting teeth and less tool wear
- Lighter, less powerful drilling equipment can be used
- Able to drill holes which are difficult or impossible to do accurately with conventional twist drill tooling - with no pre-drilling or step drilling required.
Specifications
| Description | Specification |
| Packaging Type | Hanging plastic tube |
| Package Dimensions | 113(L)mm x Ø72mm |
| Package Weight | 323g |
| Product Dimensions | 62(L)mm x Ø58mm |
| Product Weight | 280g |
| Material | HSS |
| Finish | Polished |
| Size | Ø58mm |
| Cutting Depth | 30mm |
| Shank | 3/4" (19.05mm) Weldon shank compatible with most magnetic base drills. |
| Recommended accessories/tools | Mag base drill machines (TCMD00__) |
| TCAC0004 for 30mm long cutters | |
| TCAC0005 for 55mm long cutters | |
| Warranty | Consumable products excluded from warranty unless confirmed production error. |
| Content | 1 x Annular hole cutter HSS |
Extra Info
General Drilling Tips
-
Always
use coolant when drilling. This will prolong the cutter's life and offer a better
finish.
- Slower feed rates will not add life to your cutter but actually reduce the cutter's life. Use firm steady feed pressure throughout cut. This is the Number #1 cause of broken or prematurely dull cutters
- Clean the cutter. Always make sure to clear all chips from your cutter before starting the next hole.
- Know the material characteristics. For harder materials other cutting options should be investigated
- Make sure support system for drill arbor is in place and not worn out. If using on a drill press, a support system must be used.
- Take care that the surface below the magnetic drill is clean and that the work piece is securely attached. Uneven or large build-up of debris and shavings can cause drill slippage. Material being cut should be at least 8mm thick.
- Painted surfaces pose possible slippage if paint build-up does not allow magnet to hold securely.
- When slug ejection becomes unreliable or tool resists cutting, replace your cutter or send in for re-sharpening.
- Always observe standard and specific safety instructions.
- For best performance always maintain your drill as instructed in your tool operator's manual.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.