Annular Hole Cutter Hss 64 X 55mm Weld Shank 19.05mm
R 3,674.25
Sign up to be the first to know when it's back in stock.
R 3,674.25
R 3,674.25
Product description
Tork Craft Annular Hole Cutter — HSS 64 × 55 mm, 19.05 mm (3/4') Weldon
Size: 64 mm x 55 mm [3/4' Weldon Shank]
This 64 mm diameter HSS annular cutter from Tork Craft is ideal for large-hole applications in steel and cast-iron where depth is limited. With a 55 mm cutting depth and a secure 19.05 mm (3/4″) Weldon shank, it delivers efficient, clean holes with less feed pressure and minimal burrs — perfect for structural, flange or pipe-clearance work.
Features
Features
- 64 mm diameter — for major clearance holes and structural penetrations.
- 55 mm cutting depth — shallow but large diameter, suitable for plate and structural sections.
- 19.05 mm (3/4') Weldon shank — two-flat drive ensures firm hold in magnetic drills.
- HSS material — high-speed steel construction suitable for heavy-duty metal drilling.
- Thin-wall, multi-flute design — enables faster penetration and efficient chip evacuation even in large sizes.
Benefits
- Large-hole efficiency: removes just the periphery ring, making large diameters faster than conventional twist drills.
- Smoother finish: fewer burrs and cleaner edges mean less finishing work.
- Reduced operator load: even with large size, feed pressure remains manageable, especially with shallow depth.
- Industrial durability: HSS body and Weldon interface deliver reliable performance under tough conditions.
Specifications
| Description | Specification |
| Packaging Type | Hanging plastic tube |
| Package Dimensions | 114(L)mm x Ø72mm |
| Package Weight | 480g |
| Product Dimensions | 87(L)mm x Ø64mm |
| Product Weight | 437g |
| Material | HSS |
| Finish | Polished |
| Size | Ø64mm |
| Cutting Depth | 55mm |
| Shank | 3/4" (19.05mm) Weldon shank compatible with most magnetic base drills. |
| Recommended accessories/tools | Mag base drill machines (TCMD00__) |
| TCAC0004 for 30mm long cutters | |
| TCAC0005 for 55mm long cutters | |
| Warranty | Consumable products excluded from warranty unless confirmed production error. |
| Content | 1 x Annular hole cutter HSS |
Extra Info
Extra Information
- Use with a magnetic-base drill or drill-press fitted with a 19.05 mm (3/4″) Weldon shank arbor.
- A pilot pin (sold separately) is required for centring and slug ejection — ensure correct size for your arbor.
- When drilling stainless or harder materials, apply cutting fluid and maintain a steady feed to preserve cutter life and chip clearance.
Pro Tip
- Ensure magnet base sits flush on a flat surface; begin at low RPM until nibbing occurs, then increase feed when consistent, curled chips appear. Clear chips often and re-lubricate to reduce heat and maintain finish and tool life even with large diameter cuts.
Safety
Safety
- Wear eye, ear and gloves protection; use cutting fluid to manage heat and improve chip removal.
- Ensure the magnet or drill base is firmly secured and the workpiece is stable before drilling; use a tether when working overhead or on angled surfaces.
- Do not use hammer or impact mode; maintain a steady feed and allow the slug to eject cleanly — stop immediately if feed slows or chatter begins.
- Disconnect power or disable magnet before changing cutters, shanks or pilot pins.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.