Annular Hole Cutter Hss 65 X 55mm Weld Shank 19.05mm
R 3,737.50
Sign up to be the first to know when it's back in stock.
R 3,737.50
R 3,737.50
Product description
Tork Craft Annular Hole Cutter — HSS 65 × 55 mm, 19.05 mm (3/4') Weldon
Size: 65 mm x 55 mm [3/4' Weldon Shank]
The 65 mm diameter HSS annular cutter from Tork Craft is engineered for significant clearance holes in steel and cast-iron where both diameter and depth matter. With a 55 mm cutting depth and robust 19.05 mm (3/4″) Weldon shank, it delivers fast, clean broaches with minimal burrs, reduced feed force and consistent industrial performance.
Features
Features
- 65 mm diameter — built for large bolt holes, bushings or pipe passages.
- 55 mm cutting depth — handles deeper plate and stacked structural material.
- 19.05 mm (3/4') Weldon shank — two-flat drive ensures secure clamp in magnetic drills.
- HSS (high-speed steel) body — durable for steel, cast-iron and heavy-duty use.
- Thin-wall, multi-flute design — enhanced penetration, efficient chip evacuation and lower machine load.
Benefits
- Large-hole speed: Cuts only a peripheral ring, allowing greater diameter with less material removal vs a twist drill.
- Cleaner result: Reduced burrs, better bore finish and fewer rework steps.
- Improved usability: Lower feed pressure even for large size means better operator comfort, especially in overhead or vertical drilling.
- Robust construction: HSS body + Weldon interface deliver industrial-grade reliability and repeatability.
Specifications
| Description | Specification |
| Packaging Type | Hanging plastic tube |
| Package Dimensions | 112(L)mm x Ø72mm |
| Package Weight | 486g |
| Product Dimensions | 87(L)mm x Ø54mm |
| Product Weight | 444g |
| Material | HSS |
| Finish | Polished |
| Size | Ø65mm |
| Cutting Depth | 55mm |
| Shank | 3/4" (19.05mm) Weldon shank compatible with most magnetic base drills. |
| Recommended accessories/tools | Mag base drill machines (TCMD00__) |
| TCAC0004 for 30mm long cutters | |
| TCAC0005 for 55mm long cutters | |
| Warranty | Consumable products excluded from warranty unless confirmed production error. |
| Content | 1 x Annular hole cutter HSS |
Extra Info
Extra Information
- Suitable for use with a magnetic-base drill or compatible drill press arbor fitted to a 19.05 mm (3/4″) Weldon shank.
- A pilot pin (sold separately) is required for centring the cutter and slug ejection — ensure correct size for your arbor and material thickness.
- When cutting stainless steel or harder materials, apply suitable cutting fluid and maintain steady feed to protect cutter life and prevent chip clogging.
Pro Tip
- Ensure the magnet base is clean and flat before clamping. Begin at low speed so the cutter locates accurately, then increase feed when consistent curled chips form. For deeper large-diameter cuts, pause periodically to clear chips and re-lubricate to maintain finish and prolong cutter life.
Safety
Safety
- Wear eye, ear and gloves protection; use cutting fluid to control heat and improve chip removal.
- Ensure the magnet base or clamping system is firmly secured and the workpiece stable before drilling; use a tether when working overhead or on angled surfaces.
- Do not use hammer or impact mode; maintain steady feed and allow the slug to eject cleanly — if feed slows, stop and clear chips immediately.
- Disconnect power or disable magnet before changing cutters, shanks or pilot pins.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.