Annular Hole Cutter Tct 18 X 35mm Weld Shank 19.05mm
R 799.25
Sign up to be the first to know when it's back in stock.
R 799.25
R 799.25
Product description
Tork Craft Annular Hole Cutter — TCT 18 × 35 mm, 19.05 mm (3/4') Weldon
Size: 18 mm x 35 mm [3/4' Weldon Shank]
The Tork Craft 18 mm TCT annular cutter is built for speed and durability when drilling through tough materials. Tungsten-carbide tips stay sharp longer, while the thin-wall design removes only a ring of material for faster cuts, less feed pressure, and minimal burrs. Perfect for mag-base drills on site or in the workshop when you need repeatable, precision holes.
Features
Features
- 18 mm diameter — accurate holes for bolts, fittings and conduit.
- 35 mm cutting depth — covers common plate and structural sections.
- 19.05 mm (3/4') Weldon shank — secure two-flat drive for most magnetic drills.
- TCT (tungsten-carbide-tipped) teeth — long life in abrasive and hard materials, including stainless.
- Thin-wall, multi-flute body — fast penetration with efficient chip evacuation.
Benefits
- Drills faster than twist bits by removing less material.
- Cleaner holes with reduced burrs and better finish, saving post-processing time.
- Long service life thanks to wear-resistant carbide tips.
- Less effort — lower feed pressure needed on vertical and overhead work.
Specifications
| Description | Specification |
| Packaging Type | Hanging plastic tube |
| Package Dimensions | 110(L)mm x Ø38mm |
| Package Weight | 85g |
| Product Dimensions | 75(L)mm x Ø19mm |
| Product Weight | 71g |
| Material | TCT |
| Finish | Polished |
| Size | Ø18mm |
| Cutting Depth | 35mm |
| Shank | 3/4" (19.05mm) Weldon shank |
| Recommended accessories/tools | Mag base drill machines (TCMD00__) |
| TCAC0005-01: Ø12 - 17 x 55mm | |
| TCAC0005-02: Ø18 - 102 x 35mm | |
| TCAC0005-03: Ø12 - 17 x 35mm | |
| TCAC0005-04: Ø18 - 102 x 55mm | |
| Warranty | Consumable products excluded from warranty unless confirmed production error. |
| Content | 1 x Annular hole cutter TCT |
Extra Info
Extra Information
- Use in magnetic-base drills or compatible arbors in drill presses.
- Requires a pilot pin for centering and slug ejection (sold separately).
- For best results on stainless and harder grades, apply suitable cutting fluid and moderate feed.
Pro Tip
- Engage the hole cutter on a clean, flat surface, start at low speed, and apply steady feed. Use cutting fluid to extend tool life and improve surface finish.
Safety
Safety
- Wear eye, ear and gloves protection; use cutting fluid to control heat.
- Ensure magnet adhesion is secure before drilling; tether the drill when working at height.
- Do not use hammer action; maintain steady, straight feed and allow the slug to eject.
- Disconnect power before changing cutters or pilot pins.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.