Annular Hole Cutter Tct 20 X 35mm Weld Shank 19.05mm
R 799.25
Sign up to be the first to know when it's back in stock.
R 799.25
R 799.25
Product description
Tork Craft Annular Hole Cutter — TCT 20 × 35 mm, 19.05 mm (3/4') Weldon
Size: 20 mm x 35 mm [3/4' Weldon Shank]
This 20 mm TCT annular cutter brings high-efficiency broaching through steel, structural plate and cast iron. With a 35 mm cutting depth, tungsten-carbide-tipped teeth and a rugged 19.05 mm (3/4″) Weldon shank, it’s designed for use in magnetic-base drills and heavy duty production settings where accuracy, speed and tool-life are essential.
Features
Features
- 20 mm diameter — creates accurate holes for anchor bolts, flanges and conduit pass-throughs.
- 35 mm cutting depth — accommodates common plate thicknesses and stacked material.
- 19.05 mm (3/4') Weldon shank — two-flat drive ensures secure clamp in most mag-drills.
- TCT (tungsten-carbide-tipped) teeth — built for long life when cutting structural steel and cast iron.
- Thin-wall body with multi-flute design — fast penetration, efficient chip removal and less load on machine.
Benefits
- Increased productivity: only the ring of material is removed (not the full diameter), meaning faster cuts and less effort.
- Cleaner finish: reduced burrs and smoother hole edges means less rework.
- Extended tool life: carbide tips maintain sharpness over many holes.
- Lower operator fatigue: less feed pressure required — especially helpful on overhead or vertical work.
Specifications
| Description | Specification |
| Packaging Type | Hanging plastic tube |
| Package Dimensions | 110(L)mm x Ø38mm |
| Package Weight | 92g |
| Product Dimensions | 75(L)mm x Ø20mm |
| Product Weight | 78g |
| Material | TCT |
| Finish | Polished |
| Size | Ø20mm |
| Cutting Depth | 35mm |
| Shank | 3/4" (19.05mm) Weldon shank |
| Recommended accessories/tools | Mag base drill machines (TCMD00__) |
| TCAC0005-01: Ø12 - 17 x 55mm | |
| TCAC0005-02: Ø18 - 102 x 35mm | |
| TCAC0005-03: Ø12 - 17 x 35mm | |
| TCAC0005-04: Ø18 - 102 x 55mm | |
| Warranty | Consumable products excluded from warranty unless confirmed production error. |
| Content | 1 x Annular hole cutter TCT |
Extra Info
Extra Information
- Designed for magnetic-base drills or compatible drill-press setups using a 19.05 mm (3/4″) Weldon shank arbor.
- A pilot pin (sold separately) is required for centring the cutter and ejecting the slug — ensure you use the correct size for best results.
- For stainless or harder materials, apply cutting fluid and maintain steady feed to preserve carbide life and prevent chip clogging.
Pro Tip
- Clean the base of the magnet on the workpiece, clamp securely, start at low RPM then increase feed until continuous, consistent chips form. Periodically clear chips and re-lubricate during deep cuts to avoid heat build-up and improve finish.
Safety
Safety
- Wear eye, ear and gloves protection; apply cutting fluid to control heat and chip-ejection.
- Ensure magnet is firmly attached and workpiece is stable before drilling; when working overhead or on unstable surfaces, use additional tethering.
- Do not use hammer action; feed steadily and ensure slug is properly ejected to prevent jamming.
- Disconnect power or disable magnet before changing cutters, shanks or pilot pins.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.