Annular Hole Cutter Tct 26 X 55mm Weld Shank 19.05mm

	__ __
Description	Description - __
Vendor	Vendor - __
Weight	Weight - __
Materials	Materials - __
Color	Color - __
Accessory size	Accessory size - __
Size	Size - __
	View full details

R 1,006.25

Product description

Tork Craft Annular Hole Cutter — TCT 26 × 55 mm, 19.05 mm (3/4') Weldon

Size: 26 mm x 55 mm [3/4' Weldon Shank]

The 26 mm TCT annular cutter by Tork Craft is designed for robust performance in steel and cast-iron drilling. With a55 mm cutting depth and a secure 19.05 mm (3/4') Weldon shank, it delivers fast, clean holes while minimising feed pressure and burr formation.

Features

26 mm diameter — accommodates larger anchor bolts and clearance holes.
55 mm cutting depth — suitable for thick plate and stacked material.
19.05 mm (3/4') Weldon shank — secure two-flat drive fits most magnetic-base drills.
TCT (tungsten-carbide-tipped) teeth — long life and high cutting speed in demanding materials.
Thin-wall, multi-flute body — faster penetration with reduced feed force and better chip ejection.

Benefits

Faster hole-making: only the peripheral material is removed, making the cut quicker than a traditional twist drill.
Cleaner finish: reduced burrs and smoother edges means less post-drilling clean-up.
Longer tool life: carbide tips stay sharp for many holes in steel and cast-iron.
Lower operator fatigue: reduced feed force is helpful especially during overhead or vertical drilling work.

Specifications

Description	Specification
Packaging Type	Hanging plastic tube
Package Dimensions	118(L)mm x Ø38mm
Package Weight	132g
Product Dimensions	93(L)mm x Ø26mm
Product Weight	118g
Material	TCT
Finish	Polished
Size	Ø26mm
Cutting Depth	55mm
Shank	3/4" (19.05mm) Weldon shank
Recommended accessories/tools	Mag base drill machines (TCMD00__)
	TCAC0005-01: Ø12 - 17 x 55mm
	TCAC0005-02: Ø18 - 102 x 35mm
	TCAC0005-03: Ø12 - 17 x 35mm
	TCAC0005-04: Ø18 - 102 x 55mm
Warranty	Consumable products excluded from warranty unless confirmed production error.
Content	1 x Annular hole cutter TCT

Extra Info

Extra Information

Use in a magnetic-base drill or a compatible drill-press with Weldon shank arbor.
A pilot pin (sold separately) is required for centring and slug ejection—check your arbor/holder to match size.
When drilling stainless steel or harder materials, apply cutting fluid and maintain steady feed to preserve cutter life and chip clearance.

Pro Tip

Clean the magnet base surface thoroughly and clamp to a flat area. Start the drill at lower speed until the cutter locates, then increase feed until consistent chips form. Stop periodically to clear chips and re-lubricate on deeper cuts to maximise finish and tool durability.

Extra Information

Use in a magnetic-base drill or a compatible drill-press with Weldon shank arbor.
A pilot pin (sold separately) is required for centring and slug ejection—check your arbor/holder to match size.
When drilling stainless steel or harder materials, apply cutting fluid and maintain steady feed to preserve cutter life and chip clearance.

Pro Tip

Clean the magnet base surface thoroughly and clamp to a flat area. Start the drill at lower speed until the cutter locates, then increase feed until consistent chips form. Stop periodically to clear chips and re-lubricate on deeper cuts to maximise finish and tool durability.

Safety

Wear eye, ear and gloves protection; use cutting fluid to control heat and aid chip flow.
Ensure the magnet (or work clamp) is firmly secured and the workpiece stable before operating; tether the drill when working at height or on angled surfaces.
Do not use hammer or impact action; maintain steady feed and allow the slug to eject naturally to avoid jamming.
Disconnect power before changing cutters, pilot pins or shanks.