Annular Hole Cutter Tct 32 X 55mm Weld Shank 19.05mm
R 1,259.25
Sign up to be the first to know when it's back in stock.
R 1,259.25
R 1,259.25
Product description
Tork Craft Annular Hole Cutter — TCT 55 × 35 mm, 19.05 mm (3/4') Weldon
Size: 55 mm x 35 mm [3/4' Weldon Shank]
The 55 mm TCT annular cutter removes only a thin ring of material for quicker holes, smoother finishes and lower feed force. Carbide-tipped teeth maintain speed and edge retention in demanding steels, while the 19.05 mm (3/4″) Weldon shank gives a secure, slip-free drive in most magnetic-base drills and compatible arbors.
Features
Features
- 55 mm diameter — ideal for larger bolt clearances, bushings and conduit penetrations.
- 35 mm cutting depth — covers common plate thicknesses and stacked material.
- 19.05 mm (3/4') Weldon shank — reliable two-flat drive for mag drills.
- TCT teeth — wear-resistant carbide tips for long life in steel and cast iron.
- Thin-wall, multi-flute body — rapid penetration and efficient chip evacuation.
Benefits
- High productivity — faster than twist drilling as only the periphery is cut.
- Cleaner holes — reduced burrs minimize post-processing.
- Lower effort — reduced feed pressure, helpful on vertical and overhead work.
- Consistent accuracy — pilot-pin guided centring and controlled slug ejection.
Specifications
| Description | Specification |
| Packaging Type | Hanging plastic tube |
| Package Dimensions | 124(L)mm x Ø49mm |
| Package Weight | 174g |
| Product Dimensions | 93(L)mm x Ø32mm |
| Product Weight | 153g |
| Material | TCT |
| Finish | Polished |
| Size | Ø32mm |
| Cutting Depth | 55mm |
| Shank | 3/4" (19.05mm) Weldon shank |
| Recommended accessories/tools | Mag base drill machines (TCMD00__) |
| TCAC0005-01: Ø12 - 17 x 55mm | |
| TCAC0005-02: Ø18 - 102 x 35mm | |
| TCAC0005-03: Ø12 - 17 x 35mm | |
| TCAC0005-04: Ø18 - 102 x 55mm | |
| Warranty | Consumable products excluded from warranty unless confirmed production error. |
| Content | 1 x Annular hole cutter TCT |
Extra Info
Extra Information
- Use in a magnetic-base drill or drill press with a suitable Weldon-shank arbor.
- A pilot pin is required for centring and slug ejection (sold separately).
- Apply cutting fluid and steady feed, especially on stainless or harder grades.
Pro Tip
- Seat the magnet on a clean, flat area. Start at low RPM, then increase feed until continuous chips form. On deeper cuts, pause to clear chips and re-lubricate to keep the cutter cool and the finish crisp.
Safety
Safety
- Wear eye, ear and gloves protection; use cutting fluid to control heat and improve chip flow.
- Ensure magnet adhesion and workpiece stability before drilling; tether the drill when working at height.
- Do not use hammer action; keep a steady feed and allow the slug to eject.
- Disconnect power before changing cutters or pilot pins.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.