Chuck & Key 13mm 1/2'x 20unf & Sds Adaptor
SKU: CM113
R 142.03
Tax included.
Shipping
calculated at checkout.
Out of stock
Sign up to be the first to know when it's back in stock.
Additional details
Specifications
Values
Chuck & Key 13mm 1/2'x 20unf & Sds Adaptor
R 142.03
R 142.03
Product description
Tork Craft Chuck & Key — 13 mm, 1/2″ × 20 UNF + SDS Adaptor
Convert your SDS drill for standard round/hex shank bits. This 13 mm keyed chuck with 1/2″ × 20 UNF thread includes an SDS adaptor and matching chuck key—ideal for general drilling in wood, plastics and light metals when hammer action isn’t required.
Features
Features
- 13 mm capacity — accepts bits from ~1.5 mm up to 13 mm.
- Keyed design for high clamping force and secure grip.
- 1/2″ × 20 UNF female thread (standard drill spindle size).
- SDS adaptor to fit SDS/SDS-Plus drill nose for rotary use.
- Hardened jaws & metal body for durability and accuracy.
- Chuck key included for tightening/loosening.
Benefits
- Versatile: run conventional shank bits on an SDS drill in rotary mode.
- Strong hold: keyed tightening reduces bit slip on tougher materials.
- Quick setup: adaptor installs and removes easily when switching tasks.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Model / Cat No. | CM113 |
| Product Type | Keyed drill chuck with adaptor |
| Chuck Capacity | 1.5–13 mm |
| Chuck Thread | 1/2″ × 20 UNF (female) |
| Adaptor Interface | SDS / SDS-Plus (to drill nose) |
| Construction | All-metal body, hardened jaws |
| Included | Chuck, chuck key, SDS adaptor |
| Typical Uses | General drilling in wood, plastic, light metal (rotary only) |
Video
Replacement Chuck
How to replace a chuck
Extra Info
Extra Information
- Use rotary (drill) mode only; do not engage hammer with an add-on chuck.
- Ensure the SDS adaptor clicks and locks fully before mounting the chuck.
- Periodically clean spindle/adaptor splines and apply a light machine oil.
Pro Tip
- Seat the bit fully, then tighten in all three key holes for the most concentric grip—this minimizes run-out on small bits.
- Mark the adaptor and chuck with a paint pen so you can realign to the same position after removal for repeatable concentricity.
Safety
Safety
- Disconnect power and set drill to rotary (no hammer) before use.
- Check that the SDS adaptor is fully latched and the bit is tightly clamped.
- Do not exceed the chuck’s rated capacity; avoid heavy percussion loads.
- Wear eye protection; secure the workpiece before drilling.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.