Chuck Keyless 13mm 1/2' X 20 Self-tightening
R 1,055.70
Sign up to be the first to know when it's back in stock.
R 1,055.70
R 1,055.70
Product description
Tork Craft Keyless Drill Chuck — 13 mm × 1/2″ × 20 UNF (Self-Tightening)
Upgrade your drill with quick, tool-free bit changes and a secure grip. This 13 mm keyless, self-tightening chuck fits spindles with a 1/2″ × 20 UNF thread and provides smooth tightening action with strong clamping force for general drilling in wood, plastics and light metals.
Ultra replacement 13mm (1/2') keyless drill chuck, 20 UNF thread. Replacement drill chuck for use in most small electric and cordless drills. Self tightening chuck type.
- Fits most 13mm drills
- 1/2in x 20 UNF thread
- Opening capacity: 13mm
- Durable all metal construction
Installation Info
Most chucks will have a reverse threaded
screw locking them in place that will have to be removed before unscrewing and
replacing the chuck.
Pro Tip
- To seat the chuck firmly on the spindle, run the drill in reverse at low speed for a second after hand-tightening.
- If you notice slip on tough materials, retighten at mid-stroke: stop, add a quarter-turn by hand, then continue drilling.
Features
Features
- Keyless mechanism — fast bit swaps without a chuck key.
- Self-tightening design — grip increases under load to reduce bit slip.
- 13 mm capacity — accepts bits from small diameters up to 13 mm.
- Thread: 1/2″ × 20 UNF (common drill spindle size).
- Hardened jaws & metal body for durability and concentricity.
Benefits
- Productivity: change bits quickly between operations.
- Secure grip: clamping force resists loosening during use.
- Smoother drilling: low run-out helps accuracy and finish.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Model / Cat No. | CM13-4 |
| Product Type | Keyless drill chuck (self-tightening) |
| Chuck Capacity | 1.5–13 mm |
| Thread Size | 1/2″ × 20 UNF |
| Construction | All-metal body, hardened jaws |
| Typical Uses | Wood, plastic, light metal drilling (rotary) |
Extra Info
Extra Information
- Compatible with drills featuring a 1/2″ × 20 UNF threaded spindle.
- Use for rotary drilling (non-hammer) in wood, plastics and light metals.
- Keep spindle threads and chuck clean; apply a light oil occasionally.
Safety
Safety
- Disconnect power or remove battery before changing bits.
- Ensure the bit is fully seated and tightened; do not overtighten.
- Use in rotary mode; avoid hammer action with add-on chucks.
- Wear eye protection and secure the workpiece.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.