Collet Base For Air Die Grinder 6mm Mini
R 82.57
Sign up to be the first to know when it's back in stock.
R 82.57
R 82.57
Product description
AirCraft Collet Base for Air Die Grinder 6mm Mini (AT0017-29)
At a Glance: Replacement collet base (collet holder) for the AirCraft AT0017 6mm Mini Air Die Grinder—helps keep burrs and attachments clamped securely and aligned.
The AirCraft AT0017-29 Collet Base is the foundation of the tool’s clamping system on the AT0017 6mm Mini Air Die Grinder. It supports and locates the collet assembly so your 6mm shank accessories—burrs, rotary files, stones and other attachments—seat properly and run true at high speed. If the collet area has been damaged, cross-threaded, worn, or the tool is struggling to hold accessories tightly, replacing the collet base is the right move. A solid, correctly fitting base reduces wobble, improves grip, and helps prevent accessories from slipping (which is exactly as exciting as it sounds… in the bad way).
Mini die grinders operate at high RPM, so the clamping system must be tight and aligned. A good collet base helps your accessory run straighter, grip better, and deliver cleaner results with less vibration.
Features
Features
- Direct replacement for AT0017 Designed for the AirCraft AT0017 6mm Mini Air Die Grinder.
- Collet support component Provides the base/holder for the collet system that grips 6mm shank accessories.
- Threaded and keyed design Helps locate and secure the front-end clamping assembly correctly.
- Rebuild-grade spare part Ideal when the original collet base is worn, damaged, or no longer holds true.
Benefits
- Improves accessory grip: Helps the collet clamp properly to reduce slipping under load.
- Reduces wobble and vibration: Restores correct alignment for smoother, more controlled grinding.
- Cleaner, safer operation: A secure clamping system lowers the risk of accessories working loose at speed.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | AirCraft |
| Cat No. | AT0017-29 |
| Product Type | Air Tool Spare Part (Collet Base / Collet Holder) |
| Compatible Tool | AirCraft AT0017 Air Die Grinder 6mm Mini |
| Accessory Size | 6mm shank (via collet system) |
| Function | Supports and locates collet assembly for secure accessory clamping |
Extra Info
Extra Information
- Compatible with the AirCraft AT0017 6mm Mini Air Die Grinder. Confirm your model before ordering.
- If you’re replacing the collet base, inspect the collet and collet nut too—worn clamping parts often travel in packs.
- Always use clean accessories with an undamaged 6mm shank for best grip and minimal run-out.
Pro Tip
- Lightly clean the collet area and threads before assembly, then tighten the collet nut firmly. If you feel “gritty” tightening, stop and clean—dirt can damage threads and reduce grip.
Safety
Safety
- Disconnect the air supply and release line pressure before servicing the collet area.
- Always ensure accessories are clamped securely and check for run-out before use.
- Wear eye protection and appropriate PPE when operating a die grinder.
- Never run a damaged, bent, or cracked accessory—high RPM turns small problems into fast ones.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.