Flange Nut Back & Front ( 1/2) Service Kit
R 61.87
Sign up to be the first to know when it's back in stock.
R 61.87
R 61.87
Product description
Tork Craft Flange Nut Back & Front (1/2) Service Kit (TCAG0230-SK01)
At a Glance: Back and front flange nut set (parts 1 & 2) for secure disc mounting on the Tork Craft TCAG0230 angle grinder
The flange nuts are the “quiet security guards” of an angle grinder — they centre the disc, clamp it correctly, and keep everything stable at high speed. If your flange nuts are worn, rounded, bent, or no longer tighten smoothly, you risk poor disc alignment, vibration, and unsafe clamping. The Tork Craft TCAG0230-SK01 Flange Nut Back & Front Service Kit replaces the components referenced as parts 1 and 2, restoring proper disc retention so you can change accessories confidently and get back to clean, controlled cutting and grinding.
Designed for the Tork Craft TCAG0230 platform, this replacement flange nut set is ideal when the original nuts are damaged, seized, or chewed up from incorrect tools. Fit the correct back and front flange nuts, ensure the disc seats flat, and you’ll immediately feel the difference in stability and control.
Features
Features
- Complete flange nut set: Includes the back and front flange nut components used to retain the disc/accessory.
- Parts reference match: Covers parts 1 and 2 as per the service diagram reference.
- Improves disc seating: Helps ensure the disc clamps flat and runs true when fitted correctly.
- Model-specific compatibility: Intended for use with the Tork Craft TCAG0230 angle grinder.
Benefits
- Safer disc retention: Restores secure clamping to reduce the risk of slipping or uneven seating.
- Reduced vibration: Proper seating and centring can improve smoothness and control during use.
- Faster accessory changes: Clean, undamaged nuts tighten and loosen more predictably.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCAG0230-SK01 |
| Product Type | Spare Part Service Kit |
| Component Group | Flange Nut Back & Front |
| Parts Reference | 1 & 2 |
| Compatible Tool Model | TCAG0230 |
Extra Info
Extra Information
- Compatibility: Intended for the Tork Craft TCAG0230 angle grinder series.
- Always ensure the disc is seated correctly and the correct flange face is used for the accessory type (cutting vs grinding discs may differ).
- If the spindle thread is damaged or the flange nut continually loosens, inspect the spindle and related parts before further use.
Pro Tip
- Tighten the flange nut firmly, but don’t over-tighten. Over-tightening can warp discs and make the next change a battle. Use the correct two-pin wrench and only engage the spindle lock once the grinder has fully stopped.
Safety
Safety
- Wear eye, ear and dust protection when operating an angle grinder.
- Disconnect power before changing discs or fitting any spare parts.
- Only press the spindle lock when the grinder is fully stopped.
- Ensure the guard is correctly fitted and the disc is seated flat before switching on.
- Use only rated discs suitable for the grinder and never exceed the disc’s maximum RPM.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.