Gear & Bearing & Gasket Kit (20-29)
R 906.78
Sign up to be the first to know when it's back in stock.
R 906.78
R 906.78
Product description
Tork Craft Gear & Bearing & Gasket Kit (20–29) For TC20180 RS25 20V Reciprocating Saw
At a Glance: Matched gear, bearing and gasket service kit for the TC20180 RS25 20V reciprocating saw
Heavy use, dust and tough demolition work take their toll on the drive train of any reciprocating saw. The Tork Craft TC20180-SK05 Gear & Bearing & Gasket Kit groups the critical gears, supporting bearings and sealing gaskets (items 20–29 on the parts list) into a single genuine spare pack. By renewing these components together, you can bring your RS25 20V brushless reciprocating saw back to smooth, efficient operation with reduced vibration and improved cutting performance.
This kit targets the heart of the mechanical drive system in the RS25: drive gears that convert motor rotation into blade motion, bearings that support the shaft under load, and gaskets that help keep grease in and dust out. Replacing worn or damaged parts with this genuine Tork Craft set helps restore proper alignment, quiet running and reliable service from your 20V brushless reciprocating saw on site or in the workshop.
Features
Features
- Genuine Tork Craft service kit – Original gear, bearing and gasket components specified for the TC20180 RS25 20V reciprocating saw.
- Covers key drive train parts – Includes selected gears, bearings and gaskets corresponding to items 20–29 on the exploded diagram.
- Optimised for 20V brushless RS25 – Designed to match the original housing, shafts and stroke mechanism tolerances.
- Pre-matched components – Gears and bearings supplied as a set to work together for correct meshing and support.
- Service-friendly pack – Ideal for a planned overhaul when the saw shows signs of mechanical wear or noise.
Benefits
- Restore smooth operation: Fresh bearings and correctly meshing gears help cut down vibration and harshness.
- Maintain cutting power: Well-supported, well-lubricated gears transfer motor power more efficiently to the blade.
- Reduce noise and heat: Replacing worn components and seals helps the saw run cooler and more quietly.
- Extend tool lifespan: Protects your investment in the RS25 by renewing high-stress mechanical components.
- Save time on parts selection: A single kit avoids the guesswork of ordering individual gears, bearings and gaskets separately.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TC20180-SK05 |
| Product Type | Gear & Bearing & Gasket Service Kit |
| Compatible Tool Model | TC20180 RS25 20V Brushless Reciprocating Saw |
| Key Components | Selected gears, bearings and gaskets (items 20–29) |
| Typical Application | Replacement of worn, noisy or leaking drive train components |
| Drive System | Reciprocating mechanism for 20V brushless motor |
| Pack Size | 1 × gear, bearing and gasket kit |
Extra Info
Extra Information
- Purpose-made for the Tork Craft TC20180 RS25 20V brushless reciprocating saw – always confirm the model number on your tool before ordering.
- Best used when the saw shows signs of excessive play, grinding noises, oil or grease leaks, or increased vibration during cutting.
- Refer to the TC20180 exploded diagram to identify the exact location of items 20–29 and plan your strip-down sequence.
- Use fresh high-quality grease when reassembling the gear housing to complement the new bearings, gears and gaskets.
- Approximate pack dimensions and weight can be captured separately in your product admin console for shipping and logistics fields.
Pro Tip
- As you disassemble the gear housing, lay out old components on a clean cloth in the same pattern they came out, and take close-up photos. This “exploded view” on your bench makes it much easier to place each new gear, bearing and gasket from the kit in the correct order and orientation.
Safety
Safety
- Always remove the 20V battery pack from the saw before opening the gear housing or handling any internal parts.
- Work on a clean, stable surface and keep small components organised to avoid mixing old and new parts.
- After fitting the kit, rotate the mechanism by hand to check for smooth movement before refitting the covers.
- Run the saw at no-load for a short period to bed in the new gears and bearings, and listen for any unusual noise.
- If you are unsure about any step of the repair, consult an authorised Tork Craft service centre or a qualified technician.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.