Housing Kit Compl. (41-43/50/54/56/61) Service Kit
R 184.00
Sign up to be the first to know when it's back in stock.
R 184.00
R 184.00
Product description
Tork Craft Housing Kit Compl. (41-43/50/54/56/61) Service Kit (TCAG0230-SK11)
At a Glance: Complete housing component kit (parts 41–43, 50, 54, 56 & 61) for the Tork Craft TCAG0230 angle grinder
The housing of an angle grinder is more than a shell — it’s the structure that holds the motor aligned, protects wiring from dust and strain, supports the switch area, and gives you a solid, safe grip. If the casing is cracked from impact, screw posts are broken, threads are stripped, or the housing no longer closes tightly after servicing, the grinder can feel loose, noisy, and unsafe. The Tork Craft TCAG0230-SK11 Housing Kit Complete replaces the housing-related components referenced as parts 41 to 43, plus 50, 54, 56 and 61, helping restore correct fitment, protection and a “tight” feel to your TCAG0230.
Designed for the Tork Craft TCAG0230 platform, this kit is ideal after impact damage, workshop rebuilds, or when internal repairs require replacing worn or damaged housing sections. Fit the correct housing parts, route wiring neatly, and bring the grinder back to a solid, confidence-inspiring feel.
Features
Features
- Housing repair kit: Replaces the key outer housing components used in the TCAG0230 assembly.
- Parts reference match: Covers parts 41–43, 50, 54, 56 and 61 as per the service diagram references.
- Restores secure fitment: Helps correct loose closures, broken posts and misalignment caused by damaged housings.
- Model-specific compatibility: Intended for use with the Tork Craft TCAG0230 angle grinder.
Benefits
- Safer handling: A solid housing supports safe grip and protects wiring and internal components.
- Reduced vibration from movement: Properly seated housings help prevent internal shifting and rattling.
- Extend tool life: Replacing damaged casings helps protect motor components from dust, knocks and strain.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCAG0230-SK11 |
| Product Type | Spare Part Service Kit |
| Component Group | Housing Kit Complete |
| Parts Reference | 41–43, 50, 54, 56 & 61 |
| Compatible Tool Model | TCAG0230 |
Extra Info
Extra Information
- Compatibility: Intended for the Tork Craft TCAG0230 angle grinder series.
- During installation, confirm wiring is routed correctly and not pinched between housing sections.
- Use the correct fasteners and avoid over-tightening to prevent stripping new posts or threads.
- Inspect the cord entry/strain relief and switch seating while the housing is open.
Pro Tip
- Do a “dry fit” before final tightening: place switch and wiring in position and check nothing sits proud. Tighten screws evenly (alternate sides) to avoid twisting the housing, then do a short no-load test run to confirm everything feels solid and normal.
Safety
Safety
- Wear eye protection and a dust mask when opening the tool and cleaning internal debris.
- Disconnect power before opening the tool or fitting any spare parts.
- Ensure all internal wiring is correctly routed and insulated — pinched wires can cause electric shock or failure.
- After reassembly, confirm the guard is correctly fitted and the spindle rotates freely before use.
- Perform a no-load test run in a safe area and stop immediately if you smell burning, hear rubbing or feel excessive vibration.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.