Magnetic Bit Holder 80mm Sds Plus Quick Change One Touch 1/4' Hex
SKU: T SD21680
R 154.10
Tax included.
Shipping
calculated at checkout.
Out of stock
Sign up to be the first to know when it's back in stock.
Additional details
Specifications
Values
Magnetic Bit Holder 80mm Sds Plus Quick Change One Touch 1/4' Hex
R 154.10
R 154.10
Product description
Tork Craft Magnetic Bit Holder — 80 mm (SDS-Plus ⟶ 1/4″ Hex, Quick-Change)
Packaging: Carded (for retail display)
Snap the SDS-Plus shank into your rotary hammer and drive standard 1/4″ hex bits instantly. The one-touch quick-change sleeve speeds bit swaps, while the magnet helps hold bits and screws during starts. Ideal when you’re bouncing between masonry drilling and fixings (set hammer to drill-only when driving).
Features
Features
- SDS-Plus shank — fits SDS-Plus rotary hammers.
- 1/4″ hex output — accepts standard screwdriver bits.
- Quick-change one-touch collar — rapid insert/release of bits.
- Magnetic retention — assists with bit and screw control.
- 80 mm overall length — practical reach with stable driving.
Benefits
- Faster workflow: Swap from drilling to driving in seconds.
- Fewer drops: Magnet supports cleaner starts and retrieval.
- Smoother access: Extra reach improves visibility around fittings and brackets.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | T SD21680 |
| Product Type | Magnetic bit holder / adapter |
| Shank (Input) | SDS-Plus |
| Drive (Output) | 1/4″ hex (quick-change, one-touch) |
| Overall Length | 80 mm |
| Magnetic | Yes |
| Pack Quantity | 1 (carded) |
| Barcode (EAN) | 6009515840143 |
| Suitable Tools | SDS-Plus rotary hammer (drill-only mode) |
Extra Info
Extra Information
- Use on a rotary hammer in drill-only (hammer OFF) when driving screws.
- Pair with quality 1/4″ hex bits matched to the fastener (PH, PZ, TX, etc.).
- Not intended for percussion while a driver bit is fitted.
Pro Tip
- Seat the bit fully and tug to confirm the quick-change collar has locked before driving. Start at low RPM to align, then increase speed.
Safety
Safety
- Set hammer action OFF before driving screws with this adapter.
- Wear eye protection and keep hands clear of rotating parts.
- Check the quick-change lock before use; do not exceed tool/bit torque limits.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.