Needle 0.5mm For A130 Airbrush
R 109.71
Sign up to be the first to know when it's back in stock.
R 109.71
R 109.71
Product description
AirCraft SG-A130-05 Needle 0.5mm – For A130 Airbrush
At a Glance: 0.5mm replacement needle for the AirCraft A130 airbrush—higher flow for faster coverage and thicker paint applications.
When you’re spraying larger areas, base coats or backgrounds, you want steady flow and a setup that handles thicker materials without constantly clogging. A 0.5mm needle is designed for higher paint volume and broader coverage, making it ideal for faster application and more forgiving performance—especially with heavier pigments or slightly thicker mixes.
The AirCraft SG-A130-05 0.5mm needle is a replacement part designed for the AirCraft A130 airbrush. It’s the right fix when your current needle is bent, worn or damaged, or when you’re rebuilding the airbrush for reliable high-flow spraying. For best results, pair it with the correct 0.5mm nozzle setup so the needle seats properly and delivers consistent atomisation.
The 0.5mm needle supports higher paint delivery and broader spray patterns, making it ideal for base layers and bigger work where speed and even coverage are the priority.
Features
Features
- 0.5mm Needle Size Designed for high-flow spraying and broader coverage.
- Designed For A130 Replacement needle made to fit the AirCraft A130 airbrush.
- Restores Smooth Paint Control Helps correct spitting and inconsistent flow caused by bent or worn needles.
- More Forgiving Setup Typically better suited to thicker paints and heavier pigments than finer needle sizes.
Benefits
- Faster Coverage: Ideal for base coats, backgrounds, priming and larger surfaces.
- Reduced Spitting & Pulsing: A straight needle improves seating and stabilises paint flow.
- Less Clogging Sensitivity: High-flow setups generally clog less easily with properly prepared paint.
- Extend Airbrush Life: Replacing a damaged needle helps protect the nozzle seat and keeps the airbrush performing reliably.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | AirCraft |
| Cat No. | SG-A130-05 |
| Product Type | Airbrush Needle |
| Needle Size | 0.5mm |
| Compatible Model | A130 Airbrush |
| Application | High Flow Paint Control / Broad Coverage |
| Use Case | Base Coats, Backgrounds, Priming & Larger Surface Work |
Extra Info
Extra Information
- When to replace the needle: bent tip, scratches/scoring, uneven flow, or persistent spitting even after cleaning.
- Match the size: Use with the correct 0.5mm nozzle setup for proper sealing and best spray performance.
- Best use cases: base coats, backgrounds, broader gradients, priming and general coverage work.
- Cleaning tip: Wipe the needle gently after each session—paint build-up affects flow and can stress the nozzle.
- Installation note: Insert gently; resistance usually means dried paint or misalignment—clean and recheck rather than forcing it.
Pro Tip
- For smoother base coats with a 0.5mm setup, spray in light, overlapping passes and keep the airbrush moving—coverage builds faster without flooding the surface.
Safety
Safety
- Disconnect and depressurise the air supply before disassembly.
- Handle needle tips carefully—sharp and delicate parts can cause injury or damage if mishandled.
- Use eye protection during cleaning, especially when using solvents or pressurised air.
- Work in a well-ventilated area when using cleaners, thinners or solvent-based paints.
- Test spray with water/thinner first to confirm correct assembly before spraying paint.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.