Nut & Flange Kit (1-2/ 4-5) For Tccs0185
R 79.35
Sign up to be the first to know when it's back in stock.
R 79.35
R 79.35
Product description
Tork Craft Nut & Flange Kit (1-2 / 4-5) Service Kit (TCCS0185-SK01)
At a Glance: Retaining nut and flange set (parts 1–2 and 4–5) for secure disc mounting on the Tork Craft TCCS0185 cut-off saw
On a cut-off saw, the nut and flange set is what keeps the cutting disc centred, clamped and stable at speed. If the flanges are worn, the nut is damaged, or the faces no longer clamp smoothly, you can end up with disc wobble, vibration, uneven cuts and unsafe retention. The Tork Craft TCCS0185-SK01 Nut & Flange Kit replaces the components referenced as parts 1–2 and 4–5, helping restore correct disc seating and secure clamping so your TCCS0185 can cut cleaner and run more confidently.
Designed for the Tork Craft TCCS0185 platform, this kit is ideal when the original flanges are chewed up from debris, the nut has been damaged by incorrect tools, or you’re rebuilding the spindle area for reliable, vibration-free performance.
Features
Features
- Disc retaining hardware kit: Replaces the nut and flange components used to clamp the cutting disc.
- Parts reference match: Covers parts 1–2 and 4–5 as per the service diagram references.
- Improves disc seating: Helps ensure the disc clamps flat and runs true when fitted correctly.
- Model-specific compatibility: Intended for use with the Tork Craft TCCS0185 cut-off saw.
Benefits
- Safer disc retention: Restores secure clamping to reduce the risk of slipping or uneven seating.
- Reduced vibration: Proper flange faces can improve stability and cutting control.
- Faster disc changes: Clean, undamaged retaining hardware tightens and loosens more predictably.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCCS0185-SK01 |
| Product Type | Spare Part Service Kit |
| Component Group | Nut & Flange Kit |
| Parts Reference | 1–2 & 4–5 |
| Compatible Tool Model | TCCS0185 |
Extra Info
Extra Information
- Compatibility: Intended for the Tork Craft TCCS0185 cut-off saw series.
- Keep flange faces clean — trapped grit between the flange and disc can cause wobble and uneven clamping.
- If the spindle thread is damaged or the nut repeatedly loosens, inspect the spindle and related parts before further use.
Pro Tip
- When fitting a new disc, tighten firmly but don’t over-tighten. Over-tightening can stress the disc and make the next change difficult. Always re-check that the disc is seated correctly before starting the saw.
Safety
Safety
- Wear eye, ear and dust protection when operating a cut-off saw.
- Disconnect power before changing discs or fitting any spare parts.
- Use only rated cutting discs suitable for the saw and never exceed the disc’s maximum RPM.
- Ensure the guard is correctly fitted and the disc is seated flat before switching on.
- After fitting, perform a brief no-load test and stop immediately if you see wobble, excessive vibration or abnormal noise.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.