Pu Hose Fitting Manifold 4 X 8mm Port X 1/4'm
R 73.83
Sign up to be the first to know when it's back in stock.
R 73.83
R 73.83
Product description
AirCraft PU Hose Fitting Manifold 4 x 8mm Ports x 1/4" Male (SG APKD08-02)
At a Glance: 4-Port Manifold: Four 8mm Push-In Outlets with 1/4" Male Thread Inlet
When you need one air feed to supply multiple lines neatly, the AirCraft SG APKD08-02 PU hose fitting manifold is a tidy, compact solution. It features a 1/4" male threaded inlet and four quick push-in ports for 8mm pneumatic tubing—ideal for distributing air to several actuators, valves or air-assisted stations while keeping your installation clean, organised and easy to maintain.
This manifold-style fitting acts as a mini air distribution block: connect it to a 1/4" threaded port, then run up to four 8mm tube lines from the push-in outlets. Perfect for automation, packaging rigs, air-assisted applications and workshop pneumatics where tidy routing matters.
Features
Features
- Four push-in outlets Connect up to four 8mm pneumatic tube lines quickly.
- 1/4" male threaded inlet Fits common pneumatic ports on regulators, valves and manifolds.
- Compact manifold body Keeps air line routing organised in tight installations.
- One-touch tube connections Quick assembly and easier maintenance without special tools.
Benefits
- Neater systems: Creates a central distribution point to reduce clutter and simplify routing.
- Faster installs: Push-in ports make tubing runs quick and clean.
- Easy to expand: Add or reroute lines without rebuilding your whole air circuit.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | AirCraft |
| Cat No. | SG APKD08-02 |
| Product Type | Pneumatic Manifold / Air Line Distributor |
| Outlet Ports | 4 x Push-In (for 8mm Tube) |
| Tube Size | 8mm (OD) |
| Inlet Thread | 1/4" Male |
| Configuration | 4-Way Distribution |
| Typical Use | Compressed Air / Pneumatic Systems |
Extra Info
Extra Information
- Designed for 8mm outside diameter pneumatic tubing (commonly PU/nylon air line).
- The inlet is a 1/4" male thread for connection to standard pneumatic ports and adapters.
- Use an appropriate thread sealing method where required and avoid overtightening—tighten firmly, then leak-check.
Pro Tip
- Cut tube ends square and clean before inserting. Push fully until seated, then tug lightly to confirm each line is locked. Once pressurised, check all outlets for leaks for a reliable setup.
Safety
Safety
- Always isolate and depressurise the air system before installing or removing pneumatic fittings.
- Wear eye protection when working with compressed air lines and pressurised components.
- After installation, check for leaks using soapy water or an approved leak-detection method.
- Do not use damaged tubing or fittings, and never exceed the pressure ratings of your pneumatic system components.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.