Pu Hose Fitting Tee 12mm X 1/4'f X 1/4'm
R 76.59
Sign up to be the first to know when it's back in stock.
R 76.59
R 76.59
Product description
AirCraft PU Hose Fitting Tee 12mm x 1/4" F x 1/4" M (SG-APHF12-02)
At a Glance: 12mm Push-In Tube Port with 1/4" Female Thread x 1/4" Male Thread Tee
Create a neat, space-saving branch or adapter point in your air line system with the AirCraft SG-APHF12-02 PU hose fitting tee. This versatile tee combines a quick push-in port for 12mm pneumatic tubing with a 1/4" female thread and a 1/4" male thread—ideal for routing, splitting or adapting compressed-air connections on regulators, valves and manifolds without bulky hose runs.
With both male and female 1/4" threaded ends plus a 12mm push-in tube port, this fitting helps you build clean pneumatic layouts where installation space is tight and reliable connections matter.
Features
Features
- One-touch push-in tube port Quick connection for 12mm pneumatic tubing.
- 1/4" female thread Connects easily to common pneumatic ports and adapters.
- 1/4" male thread Provides a compact threaded connection for components and fittings.
- Tee configuration Supports branching, adapting or re-routing air lines neatly.
Benefits
- Saves space: Compact tee layout is ideal where access and clearance are limited.
- Speeds up installation: Push-in tubing connection reduces time spent on air line setup.
- Cleaner hose routing: Helps reduce clutter and awkward bends around pneumatic components.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | AirCraft |
| Cat No. | SG-APHF12-02 |
| Product Type | Pneumatic Tee Fitting (Push-In to Thread Adapter) |
| Tube Size | 12mm (OD) |
| Thread A | 1/4" Female |
| Thread B | 1/4" Male |
| Configuration | Tee |
| Typical Use | Compressed Air / Pneumatic Systems |
Extra Info
Extra Information
- Designed for 12mm outside diameter pneumatic tubing (commonly PU/nylon air line).
- Threaded ends are 1/4" Female and 1/4" Male to suit common pneumatic ports and adapters.
- Use an appropriate thread sealing method where required, and avoid overtightening threaded connections.
Pro Tip
- Cut the tube end square and clean before inserting. Push fully until it seats, then tug lightly to confirm it’s locked. After pressurising, check both threaded joints for leaks.
Safety
Safety
- Always isolate and depressurise the air system before installing or removing pneumatic fittings.
- Wear eye protection when working with compressed air lines and pressurised components.
- After installation, check for leaks using soapy water or an approved leak-detection method.
- Do not use damaged tubing or fittings, and never exceed the pressure ratings of your pneumatic system components.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.