Pu Hose Fitting Tee 4mm X 1/8'f X 1/8'm
R 39.10
Sign up to be the first to know when it's back in stock.
R 39.10
R 39.10
Product description
AirCraft PU Hose Fitting Tee 4mm x 1/8" F x 1/8" M (SG-APHF04-01)
At a Glance: 4mm Push-In Tube Port with 1/8" Female Thread x 1/8" Male Thread Tee
Build a compact, practical air line connection with the AirCraft SG-APHF04-01 PU hose fitting tee. This clever tee-style fitting combines a quick push-in port for 4mm pneumatic tubing with a 1/8" female thread and a 1/8" male thread—perfect for adapting, branching or re-routing air lines in tight spaces without messy hose loops. Ideal for clean, professional pneumatic layouts in workshops and light industrial setups.
With both male and female 1/8" threaded ends plus a 4mm push-in tube port, this fitting is ideal for creating a neat take-off point, joining components, or converting between tubing and threaded ports on regulators, valves and manifolds.
Features
Features
- One-touch push-in tube port Quick connection for 4mm pneumatic tubing.
- 1/8" female thread Connects easily to common pneumatic ports and adapters.
- 1/8" male thread Provides a compact threaded connection for components and fittings.
- Tee configuration Supports branching, adapting or re-routing air lines neatly.
Benefits
- Saves space: Compact tee layout is ideal where access is limited.
- Speeds up installation: Push-in tubing connection reduces time spent on air line setup.
- Cleaner hose routing: Helps eliminate awkward bends and clutter around pneumatic components.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | AirCraft |
| Cat No. | SG-APHF04-01 |
| Product Type | Pneumatic Tee Fitting (Push-In to Thread Adapter) |
| Tube Size | 4mm (OD) |
| Thread A | 1/8" Female |
| Thread B | 1/8" Male |
| Configuration | Tee |
| Typical Use | Compressed Air / Pneumatic Systems |
Extra Info
Extra Information
- Designed for 4mm outside diameter pneumatic tubing (commonly PU/nylon air line).
- Threaded ends are 1/8" Female and 1/8" Male to suit common pneumatic ports and adapters.
- Use an appropriate thread sealing method where required, and avoid overtightening threaded connections.
Pro Tip
- Cut the tube end square and clean before inserting. Push fully until it seats, then tug lightly to confirm it’s locked. After pressurising, do a quick leak check on both threaded joints.
Safety
Safety
- Always isolate and depressurise the air system before installing or removing pneumatic fittings.
- Wear eye protection when working with compressed air lines and pressurised components.
- After installation, check for leaks using soapy water or an approved leak-detection method.
- Do not use damaged tubing or fittings, and never exceed the pressure ratings of your pneumatic system components.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.