Spare Nozzle Kit 0.8mm For H2000
R 194.35
Sign up to be the first to know when it's back in stock.
R 194.35
R 194.35
Product description
AirCraft Spare Nozzle Kit 0.8mm SG H2000-2 For H2000
At a Glance: 3-piece 0.8mm nozzle set (needle, nozzle and air cap) to refresh your H2000 for clean, dependable spraying.
The AirCraft SG H2000-2 Spare Nozzle Kit 0.8mm is a replacement nozzle set for the AirCraft H2000 spray gun/airbrush. This kit includes the essential wear components that control spray quality: the needle, the fluid nozzle, and the air cap. When these parts get worn, damaged, or clogged, you’ll see it immediately—spitting, uneven spray patterns, poor atomisation, or a gun that won’t seal properly and keeps dripping. The 0.8mm size is a handy middle ground: it can offer a bit more flow than finer setups, while still keeping control for neat, consistent coverage. Fit a fresh kit and your spray pattern becomes predictable again—exactly what you want when you’re chasing a clean finish.
A 0.8mm setup can be ideal when you want smoother flow and fewer clogging issues than very fine nozzles, while still keeping good control. Match the Cat No. SG H2000-2 to ensure correct fitment for the H2000.
Features
Features
- Complete 0.8mm nozzle kit Replaces the main parts that govern fluid flow and spray pattern.
- 3-piece set Includes needle, nozzle and air cap (as packaged).
- Reliable atomisation components Helps restore clean, even spraying when parts are worn or blocked.
- Made for H2000 Part-number referenced compatibility for the AirCraft H2000.
Benefits
- Restores consistent spray pattern: Helps eliminate spitting, uneven output and rough atomisation.
- Improves reliability: Fresh precision parts help the gun seal properly and reduce dripping.
- Good balance of flow and control: 0.8mm can suit broader coverage while still staying manageable.
- Extends tool life: Replace wear parts instead of replacing the whole airbrush/spray gun.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | AirCraft |
| Cat No. | SG H2000-2 |
| Product Type | Spare Nozzle Kit (Needle/Nozzle/Air Cap Set) |
| Nozzle Size | 0.8mm |
| Compatible With | AirCraft H2000 |
| Kit Contents | 3 piece set: needle, nozzle and air cap |
| Function | Controls fluid flow, atomisation and spray pattern |
| Replacement Use | Direct replacement by part number |
Extra Info
Extra Information
- Compatibility: Spare kit for the AirCraft H2000.
- When to replace: If cleaning doesn’t fix pattern issues, or the gun won’t seal and keeps dripping.
- Paint prep: Strain paint and thin as needed—proper prep reduces clogging and improves finish.
- Careful fitting: Avoid over-tightening the nozzle and protect the needle tip from knocks.
Pro Tip
- After fitting a new nozzle kit, test-spray on cardboard and dial in pressure and fluid flow gradually. A few minutes of setup saves a lot of sanding and swearing later.
Safety
Safety
- Use in a well-ventilated area and wear suitable respiratory protection for spraying.
- Wear eye protection and gloves when handling coatings and cleaning solvents.
- Disconnect the air supply and release pressure before changing nozzle, needle or air cap parts.
- Keep solvents and coatings away from open flames and heat sources.
- Dispose of cleaning waste responsibly according to local regulations.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.