Spindle/gear & Bearing Kit (9-19) Fir Tccs0185
R 381.23
Sign up to be the first to know when it's back in stock.
R 381.23
R 381.23
Product description
Tork Craft Spindle Gear & Bearing Kit (9-19) Service Kit (TCCS0185-SK04)
At a Glance: Spindle gear and bearing component kit (parts 9–19) for the Tork Craft TCCS0185 cut-off saw
On a cut-off saw, the spindle and gear train take serious load every time the disc bites into material. When bearings wear or gears start running out of alignment, you’ll typically hear harsh gearbox noise, feel extra vibration, or notice play that affects cutting accuracy and disc stability. The Tork Craft TCCS0185-SK04 Spindle Gear & Bearing Kit replaces the drivetrain component group referenced as parts 9 to 19, helping restore proper support, smoother rotation, and more controlled cutting performance on your TCCS0185.
Designed for the Tork Craft TCCS0185 platform, this kit is ideal for gearbox rebuilds and repairs where replacing individual parts is no longer practical. Replace the spindle gear/bearing components as intended, clean out old grease, re-grease correctly, and return the saw to confident, steady operation.
Features
Features
- Gearbox drivetrain service kit: Replaces the spindle gear and bearing component group used in the TCCS0185 assembly.
- Parts reference match: Covers parts 9–19 as per the service diagram references.
- Restores support and alignment: Helps return correct spindle stability and smoother drivetrain behaviour.
- Model-specific compatibility: Intended for use with the Tork Craft TCCS0185 cut-off saw.
Benefits
- Smoother cutting: Reduced play and improved support helps the disc run truer for cleaner results.
- Less vibration and noise: Fresh bearings/gearing components can reduce harsh gearbox feel.
- Extend tool life: A drivetrain rebuild protects the motor and prevents knock-on wear to housings and mounts.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCCS0185-SK04 |
| Product Type | Spare Part Service Kit |
| Component Group | Spindle Gear & Bearing Kit |
| Parts Reference | 9–19 |
| Compatible Tool Model | TCCS0185 |
Extra Info
Extra Information
- Compatibility: Intended for the Tork Craft TCCS0185 cut-off saw series.
- When rebuilding the gear area, clean out old grease and debris, then apply appropriate gearbox grease during reassembly.
- Inspect related parts such as guards, flange hardware and the disc mounting faces while the spindle area is open.
Pro Tip
- Before final closure, rotate the spindle by hand to confirm smooth movement with no tight spots. After assembly, do a brief no-load test and listen for an even, consistent sound before cutting under load.
Safety
Safety
- Wear eye, ear and dust protection when operating a cut-off saw.
- Disconnect power before opening the gearbox/spindle area or fitting any spare parts.
- Ensure the guard is correctly fitted and the disc is seated flat before switching on.
- Use only rated cutting discs suitable for the saw and never exceed the disc’s maximum RPM.
- After repair, perform a brief no-load test in a safe area and stop immediately if you hear grinding, rubbing or feel excessive vibration.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.