Spindle Lock Pin & Spring (19/20) Service Kit
R 14.49
Sign up to be the first to know when it's back in stock.
R 14.49
R 14.49
Product description
Tork Craft Spindle Lock Pin & Spring (19/20) Service Kit (TCAG0115-SK05)
At a Glance: Spindle lock pin and spring replacement kit (parts 19 & 20) for the Tork Craft TCAG0115 angle grinder
The spindle lock is the small but mighty helper that makes disc and accessory changes quick and controlled. If your lock button feels weak, doesn’t “bite”, or slips when you try to loosen a flange nut, chances are the lock pin and/or spring has worn or been damaged. The Tork Craft TCAG0115-SK05 Spindle Lock Pin & Spring Service Kit replaces the components referenced as parts 19 and 20, restoring a firm, positive lock so you can change discs with less frustration and more confidence.
Designed for the Tork Craft TCAG0115 platform, this service kit is ideal after heavy use, accidental engagement while spinning, or any time the lock mechanism no longer holds reliably. Fit the correct pin and spring, and your grinder’s disc changes feel “right” again.
Features
Features
- Targeted spindle-lock repair: Replaces the lock pin and spring components for the TCAG0115.
- Parts reference match: Covers parts 19 and 20 as per the service diagram references.
- Restores positive engagement: Helps the spindle lock hold securely during disc and flange nut changes.
- Model-specific fit: Intended for compatibility with the Tork Craft TCAG0115 angle grinder.
Benefits
- Easier disc changes: A firm spindle lock makes loosening/tightening smoother and more controlled.
- Improved safety and confidence: Reduced chance of slipping during accessory changes when the lock engages properly.
- Extends tool usability: Refreshes a commonly worn mechanism without replacing the entire grinder.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCAG0115-SK05 |
| Product Type | Spare Part Service Kit |
| Component Group | Spindle Lock Pin & Spring |
| Parts Reference | 19 & 20 |
| Compatible Tool Model | TCAG0115 |
Extra Info
Extra Information
- Compatibility: Intended for the Tork Craft TCAG0115 angle grinder series.
- If the spindle lock still slips after replacement, inspect the mating lock point on the gear/spindle area for wear or damage.
- Only use the spindle lock when the grinder is fully stopped—engaging it while spinning can damage the mechanism.
Pro Tip
- When refitting the spindle lock, add a tiny dab of suitable light grease to the pin contact area (not excessive). It helps the pin move smoothly and reduces wear—then always wait for a complete stop before pressing the lock during disc changes.
Safety
Safety
- Wear eye, ear and dust protection when operating an angle grinder.
- Disconnect power before fitting any spare parts or attempting disc changes.
- Never press the spindle lock while the grinder is spinning or coasting to a stop.
- Confirm the guard is correctly fitted and the spindle rotates freely before use.
- After any repair, do a no-load test run in a safe area to check for normal operation.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.