Spindle Lock Pin & Spring (24/25) Service Kit
R 14.49
Sign up to be the first to know when it's back in stock.
R 14.49
R 14.49
Product description
Tork Craft Spindle Lock Pin & Spring (24/25) Service Kit (TCAG0230-SK05)
At a Glance: Spindle lock pin and spring replacement kit (parts 24 & 25) for the Tork Craft TCAG0230 angle grinder
The spindle lock is your disc-change sidekick: press it, lock the spindle, loosen the flange nut, swap the disc, and carry on. When the lock button feels weak, won’t engage properly, or slips under torque, the usual culprits are a worn lock pin or tired spring (often after accidental engagement while the grinder is still spinning). The Tork Craft TCAG0230-SK05 Spindle Lock Pin & Spring Service Kit replaces the parts referenced as 24 and 25, restoring a firm, positive lock so disc changes are quicker, safer and far less frustrating.
Designed for the Tork Craft TCAG0230 platform, this kit is ideal for routine maintenance, workshop repairs, or any time the lock mechanism no longer “bites” cleanly. Fit the correct pin and spring and your grinder’s disc changes feel sharp and controlled again.
Features
Features
- Targeted lock-mechanism repair: Replaces the lock pin and spring used in the TCAG0230 spindle lock assembly.
- Parts reference match: Covers parts 24 and 25 as per the service diagram reference.
- Restores positive engagement: Helps the spindle lock hold securely during flange nut tightening/loosening.
- Model-specific compatibility: Intended for use with the Tork Craft TCAG0230 angle grinder.
Benefits
- Easier disc changes: A strong spindle lock makes flange nut removal and installation more controlled.
- Improved safety: Reduces the chance of slipping and sudden tool movement during disc changes.
- Extend tool usability: Refreshes a common wear mechanism without replacing larger assemblies.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCAG0230-SK05 |
| Product Type | Spare Part Service Kit |
| Component Group | Spindle Lock Pin & Spring |
| Parts Reference | 24 & 25 |
| Compatible Tool Model | TCAG0230 |
Extra Info
Extra Information
- Compatibility: Intended for the Tork Craft TCAG0230 angle grinder series.
- Never engage the spindle lock while the grinder is spinning — it can damage the lock parts and the gear/spindle interface.
- If the lock still slips after replacement, inspect the locking point on the gear/spindle area for wear or damage.
Pro Tip
- Add a tiny dab of light grease to the pin contact area during assembly (not excessive). It helps smooth engagement and reduces wear. Always wait for a complete stop before pressing the lock during disc changes.
Safety
Safety
- Wear eye, ear and dust protection when operating an angle grinder.
- Disconnect power before fitting any spare parts or changing discs.
- Only press the spindle lock when the grinder is fully stopped.
- Ensure the guard is correctly fitted and the disc is seated flat before switching on.
- After repair, perform a no-load test run in a safe area to confirm normal operation.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.