Steel & Stainless Steel Cutting Disc 115 x 1.0 x 22.2mm
SKU: ABR115SP
R 10.81
Tax included.
Shipping
calculated at checkout.
Out of stock
Sign up to be the first to know when it's back in stock.
Additional details
Specifications
Values
Steel & Stainless Steel Cutting Disc 115 x 1.0 x 22.2mm
R 10.81
R 10.81
Product description
Tork Craft Slimline Steel & Stainless Steel Cutting Disc 115 x 1.0 x 22.2 mm
At a Glance: Slimline 1.0 mm cutting disc for steel and stainless steel, with a 115 mm diameter, 22.2 mm bore and maximum speed of 13,300 rpm.
Get your metalwork cut to size with the Tork Craft ABR115SP Slimline cutting disc. Designed for compatible 115 mm angle grinders, this abrasive disc is suitable for cutting steel and stainless steel during fabrication, maintenance and repair work. Its thin 1.0 mm profile provides a narrow cutting path when correctly guided, making it a practical choice for trimming flat bar, cutting tubing, shortening bolts and sizing sheet metal. The reinforced resin-bonded construction holds the abrasive grains together as the disc edge removes material along the marked line. Whether you are preparing components for welding or adjusting a bracket to fit, the ABR115SP adds a useful steel and stainless steel cutting accessory to your workshop toolkit.
Slimline cutting profile for everyday metalwork
The Slimline designation identifies the disc's thin 1.0 mm profile. Compared with thicker cutting discs, this profile removes less material across the cut width when kept correctly aligned. Use a steady feed and cut with the disc edge throughout the operation.
Product highlights
- Steel and stainless steel cutting: Suitable for both material types within the grinder's permitted cutting capacity.
- Slimline 1.0 mm thickness: Provides a narrow cutting profile for sizing and trimming metal components.
- 115 mm diameter: Suitable for compatible angle grinders approved for this disc size.
- 22.2 mm bore: Fits grinders with the appropriate mounting flanges and locking arrangement.
- Reinforced resin bond: Features bonded abrasive construction with fibre reinforcement.
- Maximum speed of 13,300 rpm: Clearly marked on the disc label for checking grinder compatibility.
Compatibility
- Angle grinders: Compatible with suitable 115 mm angle grinders that accept the disc's 22.2 mm bore, 1.0 mm thickness and approved flange arrangement.
- Steel: Suitable for cutting steel sheet, flat bar, tubing, bolts, angle iron and profiles.
- Stainless steel: Suitable for cutting stainless steel sheet, tubing and components.
- Cutting guard: Use the grinder manufacturer's approved guard for abrasive cutting discs.
Features
Features
- Thin 1.0 mm disc: Slimline profile for straight cutting operations.
- Aluminium oxide abrasive: Abrasive type identified by the disc's A designation.
- Fibre-reinforced resin bond: Reinforced bonded abrasive construction.
- 115 mm diameter and 22.2 mm bore: Defined dimensions for checking grinder fit.
- Steel and stainless steel application: Material suitability stated on the disc label.
- Marked operating limit: Maximum rotational speed of 13,300 rpm.
Benefits
- Narrow cutting path: The thin profile removes less material across the cut width than a thicker disc.
- Practical for fabrication: Useful for preparing metal pieces to suit planned dimensions before assembly or welding.
- Useful material coverage: One disc model covers steel and stainless steel cutting applications.
- Convenient for repair work: Suitable for trimming, shortening and sizing metal components with a compatible compact grinder.
- Clear accessory selection: Published dimensions and speed markings help you check suitability before installation.
Application
- Cutting steel and stainless steel sheet to size.
- Trimming steel tubing and hollow sections.
- Cutting flat bar, angle iron and steel profiles.
- Shortening bolts and threaded steel components.
- Sizing brackets and metal pieces for fitting.
- Preparing components for welding, fabrication and maintenance work.
Specifications
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | ABR115SP |
| Product Type | Abrasive cutting disc for steel and stainless steel |
| Barcode | 6009515902926 |
| Profile Designation | Slimline |
| Disc Diameter | 115 mm |
| Disc Thickness | 1.0 mm |
| Bore Diameter | 22.2 mm |
| Abrasive Type | Aluminium oxide, identified by the A abrasive designation |
| Bond Type | Fibre-reinforced resin bond |
| Maximum Rotational Speed | 13,300 rpm |
| Suitable Materials | Steel and stainless steel |
| Compatible Tool | Suitable 115 mm angle grinder |
| Intended Operation | Cutting only |
| Standard Marking | EN 12413 |
Packaging
- 1 x Tork Craft ABR115SP Slimline Steel & Stainless Steel Cutting Disc, 115 x 1.0 x 22.2 mm, per unit ordered.
Pack size: The supplier pack size is 100 discs. This refers to the recommended ordering quantity and the number of discs packaged in a box; the listed unit is one disc.
Extra Info
Extra Information
- Understanding SS: SS means stainless steel. The disc label also uses INOX to identify its stainless steel application.
- Stainless steel handling: Keep a separate disc for stainless steel when contamination control matters. A disc previously used on mild steel can transfer steel particles onto stainless steel surfaces.
- Abrasive cutting action: The disc removes material through abrasion and gradually wears down during use.
- Cutting capacity: Available cutting depth depends on the grinder, guard, flange arrangement and remaining disc diameter.
- Storage: Keep discs dry and protected from impact, moisture and excessive heat. Observe any expiry date marked on the disc.
Important: This is a cutting disc. Use its edge for cutting and avoid side grinding, twisting or bending it inside the cut.
Pro Tips
- Allow for the cut width: Position the cut on the waste side of your marked line to preserve the finished dimension.
- Secure the material: Clamp and support the workpiece so it cannot move or close onto the disc during cutting.
- Keep the disc aligned: Establish a straight cutting position before entering the material and maintain it throughout the cut.
- Use steady pressure: Let the abrasive perform the cutting action. Forcing the grinder can slow it down and increase the risk of binding.
- Dedicate a disc to stainless steel: Store it separately from discs used on mild steel when surface cleanliness matters.
- Check the finished edge: Allow the cut piece to cool, then remove sharp burrs with a suitable separate finishing tool.
How to Use
- Check suitability: Confirm that the disc dimensions and material application suit the grinder and workpiece. The grinder's rated maximum speed must not exceed the disc's 13,300 rpm rating.
- Disconnect the power: Switch off and unplug the grinder, or remove its battery, before fitting the disc.
- Inspect and mount: Reject cracked, chipped, damaged or expired discs. Fit the disc using the correct flanges and tighten according to the grinder manufacturer's instructions.
- Prepare the grinder: Fit the approved cutting guard and auxiliary handle. Ensure the disc rotates freely without contacting the guard.
- Prepare the workpiece: Mark the cut, clamp the material and support it to prevent movement or pinching. Clear combustible materials from the spark path.
- Start safely: Wear appropriate protective equipment and hold the grinder with both hands. Run the disc clear of the workpiece and check for abnormal vibration.
- Make the cut: Allow the grinder to reach operating speed, then guide the disc along the marked line with steady pressure. Keep it aligned and avoid sideways loading.
- Finish safely: Withdraw the disc from the cut, switch off and wait until rotation stops completely before putting the grinder down. Disconnect the power before changing the disc.
Safety
Safety
- Wear eye, ear and dust protection. Use safety glasses with a suitable face shield, hearing protection and respiratory protection appropriate for the dust generated.
- Wear suitable gloves, protective footwear and close-fitting clothing. Keep loose clothing, jewellery and hair away from rotating parts.
- Keep the approved cutting guard and auxiliary handle fitted. Hold the grinder firmly with both hands.
- Never exceed the disc's 13,300 rpm maximum speed. Check the rating marked on the actual disc before use.
- Inspect the disc before fitting it. Do not use a cracked, chipped, damaged or expired disc, and never alter its mounting hole.
- Cut with the disc edge only. Do not side grind, bend, twist or force the disc through the material.
- Clamp and support the workpiece to prevent movement and disc pinching. Keep hands clear of the cutting path.
- If the disc binds, switch off and hold the grinder still until rotation stops. Correct the cause before continuing, and do not restart with the disc trapped in the cut.
- Direct sparks away from people, flammable materials and combustible dust. Keep bystanders clear of the work area.
- Do not introduce water unless both the disc and grinder are specifically approved for wet cutting.
- Allow cut pieces to cool before handling. Treat freshly cut edges as sharp.
- Wait for the disc to stop completely before putting the grinder down. Disconnect the power before accessory changes, adjustments or leaving the equipment unattended.
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.